Cart 2 india

Specification
Amperage : 12.5
Brand : FURNITLEG
BulletPoint1 : 3-in-1 Functions: Equipped with three drill bits and two different chisels, it can be used for hammer, drill, or pick by adjusting the knob on the side to meet your diversified needs .
BulletPoint2 : 5300RPM Power: The two-stroke engine with high power (1000W) and large displacement (33CC), as well as an enlarged thick-walled cylinder, can achieve a high impact frequency (3200min-1) and impact energy (30J) to easily and quickly penetrate concrete, bricks, rocks, etc with a high speed (5300rpm).
BulletPoint3 : Saving Fuel: The built-in carburetor can effectively atomize the fuel, allowing it to burn more fully. This not only improves the efficiency of the engine, but also reduces fuel consumption and saves energy costs.
BulletPoint4 : Good Filtering Effect: The built-in air filter can effectively filter out impurities in gasoline, prevent them from entering the engine, thereby reducing engine fuel consumption and improving fuel economy. In addition, it can also extend the service life of the engine, providing more stable and reliable performance for the vehicle.
BulletPoint5 : Easy to Use: The wireless design and light weight can improve the flexibility of operation. You can pull the rope to start the machine. Besides, the throttle switch, one-button flameout switch, and auxiliary handle allow for convenient use.
Color : Black
DrillType : hammer_drill
ExternallyAssignedProductIdentifier1 : 764331169279
ExternallyAssignedProductIdentifier2 : 0764331169279
IncludedComponents : 1 PC Machine
IncludedComponents1 : 1* Hammer Drilling Machine
IncludedComponents2 : 3* Drills, 1* Funnel
IncludedComponents3 : 1* Point Chisel
IncludedComponents4 : 1* Flat Chisel
IncludedComponents5 : 1* Fuel Tank
IsElectric : 1
ItemName : FURNITLEG Heavy Duty Rotary Hammer Drill, 3-in-1 Functions 1200W 2-stroke Hammer Drilling Machine Including Funnel, Fuel Tank, Chisels and 3 Drill Bits, Hand Pull Start Gas Powered Hammer Drill
ItemPackageDimensions_Height : 34.65 inches
ItemPackageDimensions_Length : 27.36 inches
ItemPackageDimensions_Width : 20.67 inches
ItemPackageQuantity : 1
ItemTorque : 1.5 newton_meters
ItemTypeKeyword : power-rotary-hammers
Manufacturer : FURNITLEG
Material : Manganese Steel
Material1 : Aluminum, Plastic
Material2 : Silicon
MaximumPower : 1000 watts
MaximumRotationalSpeed : 5300 rpm
MaximumTorque : 1.5 newton_meters
ModelName : Heavy Duty Rotary Hammer Drill
ModelNumber : 20231221005xhy
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfSpeeds : 3
PackageLevel : unit
PartNumber : DX021225
PowerSourceType : Gas Powered
ProductDescription :

Specification

Color: Black

Material: Aluminum, Plastic, Silicon

Style: Modern

Surface Treatment: Painted Process

Assembly Required: Yes

Max. Power: 1000W

Displacement: 33CC

Engine Type: Single Cylinder, Air Cooling, 2-stroke

Impact Frequency: 2300-4000bpm

Impact Energy: 30J

Max. Torque and Speed: 1.45N.m/5300rpm

Fuel Mixture Ratio: 25:1 (Gasoline: Motor Oil)

Fuel Tank Capacity: 0.9L/0.2gal/30Oz

Fuel Consumption Rate: ≤0.5L/0.1gal/16Oz Per Hour

Max Drilling Diameter: 40mm/1.5inch

Starter System: Hand Pull Start

Noise: ≤104dB

Net Weight (Exclude Drill): About 10.5kg/23lbs

Product Size: 67.2*25*24.5cm/26.5*9.8*9.7in

Engine Size: 36*32mm/14*12inch

Drill Size: 22*350mm/0.8*13inch

Point Chisel Size: 35cm/13.8in

Flat Chisel Size: 16*280mm/6*11inch

Auxiliary Handle Length: 13cm/5inch

 

Installation

1. Press down the collet.

2. Put in a drill bit or chisel.

3. Release your hand.

4. The installation is complete.

 

Package Included

1* Hammer Drilling Machine

3* Drills

1* Point Chisel

1* Flat Chisel

1* Fuel Tank

1* Funnel

Other Accessories for Assembly

 

Notes

1. Before each use, please check whether the oil bubble is full of oil. If the oil is not enough, you need to press the carburetor until the oil is full. It is best to press the carburetor every time you use it. Please replace the air filter sponge after 36 hours of continuous operation to avoid damage to the engine cylinder.

2. Please clean up the oil in the carburetor if it is not used for a long time. The carburetor does not need to be replaced if it can be used normally.

3. Please add lubricating oil regularly to ensure strong power.

4. Please do not touch the muffler exhaust hole to avoid scalding.

5. The mixing ratio of gasoline and engine oil is generally 25:1, but due to the difference of engine oil quality in different regions, we recommend the ratio of 20:1. Please do not use cheap inferior engine oil.

ProductSiteLaunchDate : 2023-12-21T08:50:14.109Z
RegulatoryComplianceCertification1 : Q-09-001A
RegulatoryComplianceCertification2 : PSDOS.0565GA-006
Size : Small
Speed : 5300 rpm
Style : Electric
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
Voltage : 220 volts
Wattage : 1000 watts