Cart 2 india

Specification
Brand : DRIKH
BulletPoint1 : High-quality Material: The product is made of high-quality stainless steel and the surface is polished, with high hardness, high wear resistance, and rust-proof performance.
BulletPoint2 : Easy to Carry: The embedded handrails on both sides make the product more convenient to transport. You can move it to any place you need to work.
BulletPoint3 : High Efficiency: The high power of 200W makes it powerful. The humanized design that can weigh automatically can effectively save the time of weighing, thus improving your work efficiency.
BulletPoint4 : High Accuracy: The built-in intelligent computer motherboard components and microcomputer intelligent control settings make the error value of the dispensing only ±2g, providing you with more accurate dispensing.
BulletPoint5 : Multi-point Vibration Design: The multi-point vibration design makes the filling smoother and has low noise. It can also effectively reduce material residue, thus improving filling accuracy.
CapacityName : Full Strip
Color : Silver
ExternallyAssignedProductIdentifier : 7630834405424
ExternallyAssignedProductIdentifier1 : 0767674952614
ExternallyAssignedProductIdentifier2 : 767674952614
IncludedComponents : 1* Powder Filling Machine 1* Foot Pedal
ItemName : Multifunction Automatic Powder Filling Machine, 200W Particle Filling Machine Grain Particle Dispenser for Beans Nail Beads Candy Particulate Matters Weighting and Filling, 10-500g
ItemPackageQuantity : 1
ItemTypeKeyword : power-rotary-tools
Manufacturer : DRIKH
Material : Stainless Steel
ModelName : Powder Filling Machine
ModelNumber : Powder Filling Machine
NumberOfFasteners : 1000
OperationMode : Manual
PartNumber : Ralondbey
Pattern : Solid
PowerSourceType : Corded Electric
ProductDescription :

How to Use

1. Remove the bottom fixing screws. The machine uses the principle of vibrating sub-assembly, please remove the bottom of the vibrator fixed screws with red markings before use.

2. Turn on the power switch. Please place the machine flat, then connect the power supply and turn on the power switch. When waiting for the machine to work, the power supply must be connected to the socket with ground wire.

3. Place the material for dividing. Pour the material to be divided into the hopper.

4. Set the weight and speed. According to the different materials set the weight and speed.

5. Weigh and dispense. Select the product category to be divided and press the "Start" button, the machine will automatically sense the material to be divided.

 

Specification

Material: Stainless Steel

Color: Silver

Process: Polishing

Assembly Required: Yes

Power: 200W

Voltage: 110V/60Hz

Quantitative Range: 10-500g/0.02-1.1lbs

Error Range: ±2g /0.004lbs (Depending on the Material)

Discharge Port Upper Width: 7cm/2.76in

Discharge Port Lower Exit: 4cm/1.57in

Product Weight: 16kg/35.27lbs

Body Specifications: 38*24*79cm/14.96*9.45*31.1in

Hopper Specification: 26*26*36cm/10.24*10.24*14.17in

 

Package Included

1* Powder Filling Machine

1* Foot Pedal

All Accessories for Installation

 

Notes

1. Please clean the inner passway with a soft towel or a brush, and if some materials are left on the inner passway, you could use a hair dryer to gently blow the leftover materials.

2. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2024-10-26T07:35:45.315Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700