Cart 2 india

Specification
Brand : Yodaoke
BulletPoint1 : M25 x 1mm Tap & M25 x 1.0mm Die Metric Thread Right Hand HSS
BulletPoint2 : Tap Long: 120mm
BulletPoint3 : Die OD: 55mm; H: 12mm
BulletPoint4 : Package included: 1 x Tap & 1 x Die
BulletPoint5 : Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
ExternallyAssignedProductIdentifier1 : 0634769984709
ExternallyAssignedProductIdentifier2 : 634769984709
FinishType : Steel
GpsrSafetyAttestation : 1
ItemName : HSS M25 x 1mm Tap and M25 x 1.0mm Die Metric Thread Right Hand
ItemPackageDimensions_Height : 14.9 centimeters
ItemPackageDimensions_Length : 2.8 centimeters
ItemPackageDimensions_Width : 12.3 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemShape1 : Round
ItemShape2 : Cone
ItemTypeKeyword : round-threading-dies
Manufacturer : Yodaoke
Material : HSS
MeasurementSystem : Metric
ModelNumber : M25 x 1mm
PartNumber : M25 x 1mm
ProductDescription : HSS M25 x 1.0mm Die & M25 x 1mm Tap Metric Thread Right Hand
ProductSiteLaunchDate : 2018-12-07T05:59:12.297Z
Size : 5-40 UNC
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27111700