Cart 2 india

Specification
AgeRangeDescription : Kid
Brand : FindTape
BulletPoint : Fun World Orange Caution Tape - Zombie Zone
BulletPoint1 : FindTape GLW-HZ Glow in the Dark Egress Hazard Tape is a cost-effective photoluminescent marking tape used to warn people of hazardous areas during the day or night. The angled, black/white chevron pattern is highly visible in the day to warn of dangerous areas, walkways, steps, and more. During low or no light periods (such as night or in the event of a power outage) the alternating chevron pattern will photoluminesce (a mild green color) in the white portion and alternate with the black.
BulletPoint2 : GLW-HZ tape has a permanent self-adhesive base that sticks to most surfaces, can be recharged using natural or artificial light, and the non-radioactive photoluminescent powders have a long lifespan.
BulletPoint3 : The glow hazard tape is 11.8 millicandelas per square meter at five minutes, and photoluminescence decreases to 4.6 millicandelas after 10 minutes. After 20 minutes they are 1.6 millicandelas but still clearly visible in a totally dark room to the night-adjusted eye. However, it would not compare in brightness to a standard flashlight.
BulletPoint4 : Please note that if you apply this product onto a porous surface such as wood, concrete or stone, the manufacturer recommends using a surface primer prior to application to help create a stable substrate. Product applications include use in a warehouse, office, garage, home, doorway, on low edges, stairways, and more.
BulletPoint5 : Carrier/Backing: photoluminescent PVC. Adhesive: solvent acrylic. Thickness: 15 mils (carrier, adhesive). Adhesion: 213 ounces per inch (to stainless steel test panel). Tensile Strength: 8.8 pounds per inch (longitudinal). Service/Operating Temperature: 23F to 122F. Elongation: 25%. Luminance (mcd/m squared): 11.8 (5 minutes). Luminance (mcd/m squared): 4.6 (10 minutes). Luminance (mcd/m squared): 1.6 (20 minutes). Core: 3-inch diameter.
Color : Alternating Luminescent Lime Green and Black
CompatibleMaterial1 : Stone
CompatibleMaterial2 : Wood
CpsiaCautionaryStatement : no_warning_applicable
EducationalObjective : Creativity
ExternallyAssignedProductIdentifier1 : 692764161105
ExternallyAssignedProductIdentifier2 : 0692764161105
ExternallyAssignedProductIdentifier3 : 00888519387283
Hazmat : auto-grounding
IncludedComponents : Tape Roll
ItemDisplayDimensions_Height : 2 inches
ItemDisplayDimensions_Length : 4.25 inches
ItemDisplayDimensions_Width : 4.25 inches
ItemDisplayWeight : 0.6 pounds
ItemName : FindTape Glow in the Dark Egress Hazard Marking Tape (GLW-HZ): 2 in. x 33 ft. (Alternating Luminescent Lime Green and Black)
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 4.25 inches
ItemPackageDimensions_Width : 4.25 inches
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : safety-tape
Language : spanish
Manufacturer : FindTape
ManufacturerMaximumAge : 1
Material : photoluminescent PVC
ModelNumber : Glow in the Dark Egress Hazard Marking T
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfLabels : 10
OperationMode : Manual
PackageLevel : unit
PartNumber : GLW-HZ/PHOTZ2
ProductDescription :

FindTape GLW-HZ Glow in the Dark Egress Hazard Tape is a cost-effective photoluminescent marking tape used to warn people of hazardous areas during the day or night. The angled, black/white chevron pattern is highly visible in the day to warn of dangerous areas, walkways, steps, and more. During low or no light periods (such as night or in the event of a power outage) the alternating chevron pattern will photoluminesce (a mild green color) in the white portion and alternate with the black.

GLW-HZ tape has a permanent self-adhesive base that sticks to most surfaces, can be recharged using natural or artificial light, and the non-radioactive photoluminescent powders have a long lifespan.

The glow hazard tape is 11.8 millicandelas per square meter at five minutes, and photoluminescence decreases to 4.6 millicandelas after 10 minutes. After 20 minutes they are 1.6 millicandelas but still clearly visible in a totally dark room to the night-adjusted eye. However, it would not compare in brightness to a standard flashlight.

Please note that if you apply this product onto a porous surface such as wood, concrete or stone, the manufacturer recommends using a surface primer prior to application to help create a stable substrate.

ProductSiteLaunchDate : 2019-01-08T16:20:59.576Z
Size : 2 in. x 33 ft.
StreetDate : 2017-04-18T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation1 : Concrete
SurfaceRecommendation2 : Stone
SurfaceRecommendation3 : Wood
TargetGender : unisex
Theme : Horror
UnitCount : 1
WaterResistanceLevel : water_resistant