Cart 2 india

Specification
Brand : Nikalite
BulletPoint1 : Nikkalite Type 2 Super Engineer GradeReflective Tape
BulletPoint2 : ASTM D4956 Type 2 Reflective Tape. 60% to 100% brighter than regular engineering grade reflective tape.
BulletPoint3 : Approximately 5.5 mil and has a permanent acrylic adhesive with a peel-off backing
BulletPoint4 : Nikkalite product that is stamped with a star watermark to show that it is super engineer grade and not regular engineer grade
BulletPoint5 : Single-layer design meaning it will not delaminate like other reflective tapes. Rated for a 10-year outdoor life. Visible for thousands of feet away versus hundreds with standard reflective tapes.
Color : Red
CompatibleMaterial : Plastic
ExternallyAssignedProductIdentifier1 : 764083623456
ExternallyAssignedProductIdentifier2 : 0764083623456
ExternallyAssignedProductIdentifier3 : 00764083623456
IncludedComponents1 : ULTRA STD ORANGE/WHT DOT
IncludedComponents2 : ULTRA STD ORANGE/WHT DOT
IncludedComponents3 : ULTRA STD ORANGE/WHT DOT
IncludedComponents4 : ULTRA STD ORANGE/WHT DOT
IncludedComponents5 : ULTRA STD ORANGE/WHT DOT
ItemName : Nikalite Red Reflective Tape Type 2 Super Engineer Grade 1"" 2"" 4"" 6"" Nikkalite Retroreflective Glassbead SEG (6"" x 20'), Red_SEG-6.20
ItemPackageDimensions_Height : 29.8958 centimeters
ItemPackageDimensions_Length : 5.8928 centimeters
ItemPackageDimensions_Width : 29.6926 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : safety-tape
Manufacturer : Nikalite
Material : SEG
ModelNumber : Red_SEG-6.20
NumberOfItems : 1
PackageLevel : unit
PartNumber : SEG-Red_6.20
Pattern : Solid
ProductDescription : Type 2 Super Engineer Grade Reflective Tape. SUPER-ENGINEER GRADE REFLECTIVE TAPE (SEG) is 60% to 100% brighter than regular engineering grade reflective tape. Great for smooth flat or smooth round surfaces like pipes, bollards, and bar gates. SEG is a Type II retro-reflective adhesive tape that is approximately 5.5 mil and has a permanent acrylic adhesive with a peel-off backing. It utilizes embedded microscopic glass beadlets to reflect light and is commonly used for reflective striping or markings on vehicles, bicycles, wheelchairs, bollards, & stock gates. It meets ASTM specifications D 4956 and LS-300C is resistant to weathering and fading and has 12-year minimum longevity. On vehicles, it is best applied using a soapy water solution (or Windex) and a squeegee. For best results, the adhesive should be allowed to cure for about 48 hours. This is a Nikkalite product and is stamped with a star watermark to show that it is super engineer grade and not regular engineer grade (which is not nearly as bright). Sold in 1, 2, 4 and 6-inch widths. 10, 20, or 30-foot lengths. ASTM D4956 Type 2 Reflective Tape. Single-layer design meaning it will not delaminate like other reflective tapes. Rated for a 12-year outdoor life. Visible for thousands of feet away versus hundreds with standard reflective tapes. Very aggressive adhesive. Peel, stick, and press on with a soft cloth. (Clean dry smooth surface) Used to mark emergency vehicles, fire trucks, ambulances, helmets, loading dock areas, bollards, poles, dumpsters, gates, barricades, tractor-trailers, and more.
ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2024-04-17T21:16:23.116Z
RecommendedUsesForProduct : Barricade, Pavement Marking, Hazardous Areas, Caution Zones, and Equipment Marking
RecommendedUsesForProduct1 : Indoor
RecommendedUsesForProduct2 : Outdoor
RecommendedUsesForProduct3 : Arts And Craft
RecommendedUsesForProduct4 : Painting
Size : 20' Feet
Style : 6" Inch
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation : Glass
UnitCount : 1
UnspscCode : 31201500
WaterResistanceLevel : waterproof