Specification Brand : SewViz BulletPoint : Price For: Each Standards: OSHA 1910.144(a), OSHA 1926-956(c)(1) Item: Flagging Tape Roll Length: 300 ft. Material: PVC Sub-Category: Flagging Tape Roll Width: 1-3/8" Thickness: 2 mil Legend: Polka Dot Color: Orange/Black Country of Origin (subject to change): United States BulletPoint1 : 4" Inch Yellow Pavement, Court, and Floor Marking Tape. Aluminum based construction for conformability. Heavy-Duty grade. Easy to apply. BulletPoint2 : This is a "Wet Reflective" material meaning it will reflective in wet/rainy/fog environments BulletPoint3 : Semi permanent or temporary applications. BulletPoint4 : Heavy-Duty Grade is highly reflective BulletPoint5 : Apply to clean dry and fairly smooth surface and then press in with a heavy bouncy rubber tire. The rougher the surface the more pressure that should be used. When properly applied the tape will seal with the surface forming a water tight bond. Can be applied using a floor tape applicator. Color : Yellow CompatibleMaterial : Broad Range of Materials CompatibleMaterial1 : Plastic CompatibleMaterial2 : Metal CompatibleMaterial3 : Wood CompatibleMaterial4 : Rubber ExternallyAssignedProductIdentifier : 9395118869375 ExternallyAssignedProductIdentifier1 : 683649676968 ExternallyAssignedProductIdentifier2 : 0683649676968 IncludedComponents : Unit^Instruction Guide ItemName : SewViz Yellow Premium Pavement Tape 4" (150' Foot Rolls) Wet Reflective Court Floor Marking Tape - Aluminum Based FOL 300 Heavy-Duty Grade ItemPackageDimensions_Height : 0.5 inches ItemPackageDimensions_Length : 8 inches ItemPackageDimensions_Width : 5 inches ItemPackageQuantity : 1 ItemTypeKeyword : safety-tape LowerTemperatureRating : -10 degrees_celsius Manufacturer : FOL Material : Aluminum Based Material1 : Metal Material2 : Fiber ModelName : HH-DT-328530-CAU ModelNumber : PaveTape-Prem-Yellow NumberOfBoxes : 1 NumberOfItems : 1 PackageLevel : unit PartNumber : Prem-Yellow-PaveTape ProductDescription : 4" Inch Yellow Pavement, Court, and Floor Marking Tape. Aluminum based construction for conformability. Heavy-Duty grade. Easy to apply. This is a "Wet Reflective" material meaning it will reflective in wet/rainy/fog environments Apply to clean dry and fairly smooth surface and then press in with a heavy bouncy rubber tire. The rougher the surface the more pressure that should be used. When properly applied the tape will seal with the surface forming a water tight bond. Can be applied using a floor tape applicator. -Self adhesive, conformable, aluminum based product. -Semi permanent or temporary applications. -Can be removed. (Note - tape is fine for straight lines but is not flexible enough to create curved lines.) -Simple installation procedure. -Heavy-Duty Grade is highly reflective. -Consists of an aluminum film coated with adhesive on the bottom and coated with paint and reflective glass beads on the top. -Holds up to traffic driving straight over it. However, twisting tires can cause it to release. ProductExpirationType : Does Not Expire ProductSiteLaunchDate : 2024-06-14T03:07:46.902Z RecommendedUsesForProduct : Outdoor RecommendedUsesForProduct1 : Outdoor RecommendedUsesForProduct2 : Electrical RecommendedUsesForProduct3 : Plumbing Size : One Size Style : CAUTION DO NOT ENTER SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredDgHzRegulation1 : other SupplierDeclaredDgHzRegulation2 : other SupplierDeclaredDgHzRegulation3 : other SupplierDeclaredDgHzRegulation4 : other SupplierDeclaredDgHzRegulation5 : other TensileStrength : 2500 kips_per_square_inch UnitCount : 1 UnspscCode : 31201500 UpperTemperatureRating : 80 degrees_celsius WaterResistanceLevel : water_resistant