Cart 2 india

Specification
Brand : Taytools
BulletPoint1 : Precision, micron-graded Aluminum Oxide (AO) abrasive offers a fast cut rate and a superior, uniform finish on many substrates and is ideal for sanding plastics, wood, paint, e-coat, composites and metal
BulletPoint2 : Strong 3 mil film backing enhances abrasive durability and offers greater tear-resistance than comparable paper products, making it ideal for high-production environments
BulletPoint3 : Can be used wet or dry
BulletPoint4 : Pressure sensitive adhesive (PSA) backing allows quick, flat attachment and clean removal for multi-step finishing processes
BulletPoint5 : 8.5 inch x 11 inch sheets may be easily cut and shaped per project requirements
Color : Assorted
CompatibleDevices : Orbital Sander
CompatibleDevices1 : Mouse Sander
CompatibleDevices10 : Disc Sander
CompatibleDevices11 : Angle Grinder
CompatibleDevices12 : Orbital Sander
CompatibleDevices2 : Oscillating Spindle Sander
CompatibleDevices3 : Edge Sander
CompatibleDevices4 : Sanding Block
CompatibleDevices5 : Delta Sander
CompatibleDevices6 : Straight Line Sander
CompatibleDevices7 : Die Grinder
CompatibleDevices8 : Belt Sander
CompatibleDevices9 : Drum Sander
CompatibleMaterial : Wood
CompatibleMaterial1 : Metal
CompatibleMaterial2 : Aluminum
CompatibleMaterial3 : Wood
CompatibleMaterial4 : Wood
ExternallyAssignedProductIdentifier1 : 0796029770337
ExternallyAssignedProductIdentifier2 : 796029770337
ExternallyAssignedProductIdentifier3 : 00765139331851
GpsrSafetyAttestation : 1
ItemName : 3m (TM) Lapping Microfinishing Polishing Film 8.5 inches x 11 inches Aluminim Oxide (AO) Pressure Sensitive Adhesive (PSA) Backing 3 Mil Film Polymer Backing (3, 100 Micron / 120 Grit)
ItemPackageDimensions_Height : 17 centimeters
ItemPackageDimensions_Length : 0.5 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 3
ItemTypeKeyword : sandpaper-sheets
Manufacturer : 3M (TM)
Material : Aluminum Oxide
Material1 : Blend
Material2 : Blend
Material3 : Blend
Material4 : Blend
Material5 : Blend
ModelName : 80 Grit White Rubbing Stone 8"x2"x1"
ModelNumber : 5030
NumberOfItems : 5
PackageLevel : unit
PartNumber : 5030
Pattern : Solid
ProductDescription : 3M manufacturers lapping film using a wide range of abrasive materials utilizing numerous abrasives, backing materials and bonding agents. These precision microfinishing lapping sheets were developed for the electronics industry but can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high-strength, tear-resistant polyester film backing. This fast cutting, water resistant abrasive provides a precise, consistent, close tolerance cut rate throughout the life of the product. Sheets are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. Can also be used to put a fine polish on jewelry or gemstones. These sheets are Non-PSA (Pressure Sensitive Adhesive) backed. They have a 3 mil high-strength polyester film backing is waterproof and less likely to tear than traditional wet or dry sandpaper. They are available in the following grades/grits: 0.05 micron (off-white) or 500,000 grit, 0.3 micron (white) or 60,000 grit, 1 micron (light green) or 14,000 grit, 3 micron (pink) or 8,000 grit, 5 micron (brown) or 4500 grit, 9 micron (light blue) or 1800 grit, 12 micron (yellow) or 1200 grit, 30 micron (green) or 600 grit, 40 micron (blue) or 300 and 60 micron (ivory) or 250 grit. These sheets are not marked so using the above grit/color key will be the only accurate way to identify. In the finer Non-PSA grits, it can be difficult to differentiate the abrasive side from the backing. The abrasive side will always have a matte finish, where the film backing side will be glossy.
ProductSiteLaunchDate : 2017-04-19T07:00:00.000Z
Size : 100 Micron / 120 Grit
StreetDate : 2017-03-13T00:00:01Z
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31191500