Cart 2 india

Specification
Brand : Sanpyl
BulletPoint1 : BIDIRECTIONAL CONVERSION: 3.5in IDE to SATA riser card can be bidirectionally converted, allowing your old IDE hard disk to be connected to the SATA motherboard, or your old motherboard to be connected to the SATA hard disk.
BulletPoint2 : PLUG AND PLAY: IDE to SATA riser card does not need a driver, the hard disk can be found directly in the host BIOS or DOS,for WINDOWS, support hot swap, plug and play.
BulletPoint3 : 1.5GBPS TRANSFER: The transfer rate of IDE hard disk drive adapter is up to 1.5Gbps, and supports standard ATAPI, ATA/133, ATA/100, ATA/66, ATA/33.EIDE.
BulletPoint4 : WIDE APPLICATION: IDE hard disk drive adapter supports standard IDE storage devices (such as Hard Disk, DVD, DVD , CD ROM, CD RW...) Some optical drives do not support.
BulletPoint5 : WIDE COMPATIBILITY: IDE riser card supports standard SERIAL ATA specifications, supports large capacity storage devices 137GB (depending on the motherboard), and can be used with various machines.
Color : default
CompatibleDevices : Hard Drive, Solid State Drive
ConnectorGender : Male-to-Male
ConnectorType : 22 Pin
ConnectorType1 : NEMA 5-15P
ConnectorType2 : IEC320 C13
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 848034004607
ExternallyAssignedProductIdentifier2 : 0848034004607
GpsrSafetyAttestation : 1
IncludedComponents : 1x 7+15-pin SATA Hard Drive Cable
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
InputCurrent : 15 amps
InputVoltage : 240 volts
IsUlListed : 1
ItemLength : 300 inches
ItemName : 3.5 Inch IDE to SATA Adapter Card, Bidirectional Conversion 1.5Gbps IDE to SATA Riser Card Support Hot Swap IDE Hard Disk Drive Adapter for Home Office
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 16 centimeters
ItemPackageDimensions_Width : 13 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : computer-sata-cables
Manufacturer : Sanpyl
Material : copper
MaximumVoltage : 5 volts_of_direct_current
ModelName : NUC 5 6 7 Gen
ModelNumber : Sanpylfubk9mh0td1320
NumberOfItems : 1
NumberOfPins : 15
PartNumber : Sanpylfubk9mh0td1320
ProductDescription : How to Use:
1. Turn off the power of the computer host before .
2. Open the computer case, insert the IDE socket of the conversion card into the IDE socket of the computer motherboard (the motherboard with IDE interface).
3. Connect the large end of the supplied power cord to the spare power cord of the chassis power supply, and the small end to the conversion card board (white socket, note that the direction cannot be reversed).
4. Connect one end of the provided data cable to the SATA socket of the conversion card, and the other end to the SATA interface of the SATA device (such as a SATA hard disk).
5. After the connection is complete, boot the computer and enter the BIOS for device detection. The computer host should be able to correctly identify the connected SATA device.

Specification:
Item Type: 3.5in IDE to SATA Riser Card
Product Material: PCB
Chip: JM20330 Original Chip
Interface Description:
SATA1: SATA Motherboard IDE Device (the IDE Hard Disk is Used on the SATA Motherboard, Please Connect the SATA Cable to the Sata1 Interface, and Insert the IDE Port of the Converter into the Hard Disk IDE. Set to Master)
SATA2: IDE Motherboard,SATA Device (the SATA Hard Disk is Used on the IDE Motherboard, Connect the SATA Data Cable to SATA2, and Insert the IDE of the Converter into the IDE of the Motherboard.
Conversion Card Description:
SATA 100/133 Hard Drives:Support
Serial First Generation Transfer Rate of 1.5gbps (150mbytes/s):Support
ATA 100/133 Hard Drives:Support
IDE Hard Disk Larger Than 240gb:Support
Transfer Rate:1.5gbps (150mbyte/s)
Compatible:Compatible with ATA 1.0 Standard
Compatible:Compatible with SATA 1.0 Standard

Package List:
1 x 3.5in IDE to SATA Riser Card
1 x Power Cable
1 x SATA Cable


ProductSiteLaunchDate : 2022-09-16T14:15:33.185Z
RecommendedUsesForProduct : for Mini PC
Size : 25 ft
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
TotalPowerOutlets : 1
UnitCount : 1
UnspscCode : 43201400
Voltage : 125 volts
WarrantyDescription : 1 year warranty
Wattage1 : 65 watts
Wattage2 : 90 watts
Wattage3 : 130 watts