Cart 2 india

Specification
Brand : CUNTO
BulletPoint1 : Small, lightweight and highly reliable weighing controllers
BulletPoint2 : Weigh controllers are devices that combine weighing and control functions in a single unit.
BulletPoint3 : The controller calculates and displays the weight of the material on the scale. The weight of the material on the scale is compared with the set value and if the set value is reached, the controller controls the actuator.
BulletPoint4 : Please allow a volume error of 1-3 mm due to manual measurement.
BulletPoint5 : Colours may vary slightly due to differences in monitors and conditions at the time of photographing.
Color : One Color
ExternallyAssignedProductIdentifier : 6417899935674
ItemName : CUNTO Weighing Display Controller, Peak Weighing Instrument Weighing Sensor Display Relay (Size : AD2015E)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : industrial-scale-and-balance-accessories
Manufacturer : CUNTO
MeasurementAccuracy : 1
ModelNumber : CUNTO
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CUNTO
ProductDescription : Display accuracy: 1/10000Display window: single row 5-digit LED displayA/D conversion: 24-digit ADPower supply voltage: DC12V30Voutput rate: 10/40/640/1280 times/secPort output: 2015E: dual relay2015E2: dual relay + RS232, 2015E4: dual relay + RS485Display peak value: Peak light is onDisplay bottom value: Valley light is onDisplay peak-valley value: Peak and valley lights are onOFTENIn the measurement state: enter the common parameter menuSET/CALIIn the measurement state: short press to enter the setting menuThis instrument can choose to use relay or transistor output. When using relay output, since the relay output can be connected to both DC load and AC load, there is no internal protectionProtection of DC RelayThe resistor/capacitor network is applied to the low voltage (DC30V) DC relay circuit, and it is connected across the load to form a DC relay protection circuit driven by the relay to drive the DC loadProtection of AC RelayWhen using an AC relay to control the load, it is recommended to connect a resistor-capacitor network and a variable resistor to the AC relay for protectionThe wiring method is: four-wire connection.
ProductSiteLaunchDate : 2024-01-31T08:23:25.864Z
Size : AD2015E
UnitCount : 1
UnspscCode : 41113700