Cart 2 india

Specification
Brand : Teyleten Robot
BulletPoint : Varactor Diodes
BulletPoint1 : Operating voltage: 1.5 - 36V
BulletPoint2 : Operating Current: 12V
BulletPoint3 : 25C without cooling measures ≤ 15A (15A long run test 30 minutes) 12V 25C heatsink + air-cooled ≤ 30A (30A long run test 30 minutes) the theory of heat dissipation to do a good job more than 50A can be, but limited by the heat dissipation conditions more than 30A
BulletPoint4 : Static current: Oma
BulletPoint5 : Pack in a ESD Bag with Main Specs Label, for Long Time Protection and Indetification.
Color : [9] 1n5817
ExternallyAssignedProductIdentifier : 7320553364538
ItemName : Teyleten Robot XL74610 Ideal Diode Module Adopts LM74610 Dedicated Chip to Simulate Simulation Ideal Diode Rectifier Board 15A/30A 1.5V-36V 5pcs
ItemPackageDimensions_Height : 0.4 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 3 inches
ItemPackageQuantity : 1
ItemShape : DO-41
ItemTypeKeyword : schottky-diodes
Manufacturer : Teyleten Robot
Material : Other
ModelName : CZPBXOX
ModelNumber : 1N5817 x 100 Pieces
NumberOfBoxes : 1
NumberOfItems : 100
PartNumber : XL74610
ProductDescription : because the module was designed without common ground design, so the board can not add diodes, and output capacitors to prevent damage caused by transient over-voltage, so the user in the use of transient high-voltage pulses may exist, or the use of the voltage close to the 35V, it is recommended to follow the screenshot below to add a diode and output capacitors to the module for protection. The voltage drop of the module is about 0.3V at no load or very low load current, and decreases significantly with load currents greater than 10ma (12V test) and is dependent on the amount of current.
ProductSiteLaunchDate : 2024-11-18T09:35:41.546Z
Size : [9] 1N5817
Style : [9] 1N5817
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 32111500
Voltage : 20 volts