Cart 2 india

Specification
ArtCraftKitType : hydro dipping kit
Brand : Generic
BulletPoint1 : 50cm width, 1unit is 400cm length, 2units=800cm continuous length in a roll, and so on...
BulletPoint2 : Suitable for White base color
BulletPoint3 : Applicable with all brands of activators
BulletPoint4 : Sealed packaging to keep the film in good condition
BulletPoint5 : Sealing clip included for your film preservation
Color : Green, Transparent
ExternallyAssignedProductIdentifier : 4963173176735
ExternallyAssignedProductIdentifier1 : 0702868278040
ExternallyAssignedProductIdentifier2 : 702868278040
IncludedComponents : Hydrographic Film (Burl Wood - BW-49-000)
ItemName : Generic ST Color Camo005 Water Transfer Printing/Hydrographics/Hydro Dipping Film Digital Jungle Camo 50cm Widthx400cm Length Green
ItemPackageDimensions_Height : 52.07 centimeters
ItemPackageDimensions_Length : 2.54 centimeters
ItemPackageDimensions_Width : 2.54 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : screen-printing-kits
Manufacturer : UniJade
Material : PVA
ModelName : Camouflage
ModelNumber : Camo005
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PaintType : Oil
PartNumber : Camo005
ProductDescription : Water Transfer Printing/Hydro Dipping/Hrdrographics is the technique to transfer the pattern of the film to any object surface. Please follow the steps 1. Prep, Prime, and Paint your object. Besides of ABS plastic, all other materials need to be painted with oil base paint in order to proceed water transfer printing. 2. Cut the film in proper size for your object It's important to consider the height of your object. Make sure the film is much bigger than the cover area of your object. 3. Tape 4 sides of the film In case of the pattern distortion and scattering after spraying activator. 4. Distinguish the hydrophilic side of the film We and use your thumb and index fingers to pinch the film for few seconds. After released, the sticking side is the hydrophilic side of the film. 5. Lay the film on water for more than 1min WITH the hydrophilic side face down Tap/drive the bubble out under the film if there is any. The lower water temperature is, the more time required for the film stay on water. 6. Spray activator in fine mist form evenly on the film to activate the film 7. Dip your object in 40degree angle into water slowly and steadly 8. After fully immersed, slightly shake your object in the water for few seconds 9. Take out your object and rinse the object surface with running water of faucet or showerhead It's important not to touch or rub the object surface before it's dry during/after rinsing. 10. Let the object dry naturally or by oven 11. Paint the clear paint for glossing and/or protection purpose for your object surface.
ProductSiteLaunchDate : 2021-05-19T20:00:33.503Z
ScaleName : life-size
Seasons : All Seasons
Size : 50cm Widthx400cm Length
Style : Camouflage
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword : Professional Audience
TargetGender : unisex
Theme : Jungle
UnspscCode : 44102000
WarrantyDescription : FBA Warranty