Cart 2 india

Specification
AgeRangeDescription : Kid
ArtCraftKitType : Water Transfer Printing
Brand : Generic
BulletPoint1 : 50cm width, 1unit is 400cm length, 2units=800cm continuous length in a roll, and so on...
BulletPoint2 : Suitable for WHITE / YELLOW / RED shades base color
BulletPoint3 : Good extensibility after activated
BulletPoint4 : Applicable with all brands of activators
BulletPoint5 : Sealed packaging to keep the film in good condition
BulletPoint6 : Sealing clip included for your film preservation
Color : Clear
ExternallyAssignedProductIdentifier : 4963173176438
ExternallyAssignedProductIdentifier1 : 755121442252
ExternallyAssignedProductIdentifier2 : 0755121442252
IncludedComponents : Sealing clip
ItemName : ST Color WD003-Water Transfer Printing / Hydrographics / Hydro Dipping Film-Elm Burl Wood Grain-50cm Widthx400cm Length
ItemPackageDimensions_Height : 51.2826 centimeters
ItemPackageDimensions_Length : 2.794 centimeters
ItemPackageDimensions_Width : 3.302 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : screen-printing-kits
Manufacturer : UniJade
Material : PVA
Material1 : Pvc
Material2 : Vinyl
ModelName : Wood Grain
ModelNumber : WD003
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PaintType : Oil
PaperFinish : smooth
PaperSize : 8.5-x-11-inch
PartNumber : WD003
ProductDescription : Water Transfer Printing/Hydro Dipping/Hrdrographics is the technique to transfer the pattern of the film to any object surface. Please follow the steps 1. Prep, Prime, and Paint your object Besides of ABS plastic, all other materials need to be painted with oil base paint in order to proceed water transfer printing. 2. Cut the film in proper size for your object It's important to consider the height of your object. Make sure the film is much bigger than the cover area of your object. 3. Tape 4 sides of the film In case of the pattern distortion and scattering after spraying activator. 4. Distinguish the hydrophilic side of the film Wet and use your thumb and index fingers to pinch the film for few seconds. After released, the sticking side is the hydrophilic side of the film. 5. Lay the film on water for more than 1min WITH the hydrophilic side face down Tap/drive the bubble out under the film if there is any. The lower water temperature is, the more time required for the film stay on water. 6. Spray activator in fine mist form evenly on the film to activate the film 7. Dip your object in 40degree angle into water slowly and steadily 8. Slightly shake your object in the water for few seconds after fully immersed 9. Take out your object and rinse the object surface with running water of faucet or shower-head It's important not to touch or rub the object surface before it's dry during/after rinsing. 10. Let the object dry naturally or by oven 11. Paint the clear paint for glossing and/or protection purpose for your object surface
ProductSiteLaunchDate : 2021-05-19T20:00:33.503Z
ScaleName : Life-size
Seasons : All Seasons
SheetCount : 200
Size : 50cm Widthx400cm Length
Style : Tube
SubjectCharacter : Ape
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
TargetAudienceKeyword : Professional Audience
TargetGender : unisex
Theme : Animal
UnitCount : 200
UnspscCode : 44102000
WarrantyDescription : FBA Warranty