Cart 2 india

Specification
AgeRangeDescription : Adult
ArtCraftKitType : Water Transfer Printing
Brand : STColor
BulletPoint1 : Just Ride Dirty, the ultimate rule of Roller Derby Angels
BulletPoint2 : Suitable for White base color
BulletPoint3 : Applicable with all brands of activators
BulletPoint4 : Good extensibility after activated
BulletPoint5 : Vaccum sealed packing to keep the film in good condition
BulletPoint6 : Sealing clip included for your film preservation
Color : Blue, Colorful
ExternallyAssignedProductIdentifier : 4711438843454
GpsrSafetyAttestation : 1
IncludedComponents : activator, sealing clip, vacuum sealed packing, PVA film, scissors, tape
ItemName : STColor SK004-4-Water Transfer Printing Film/Hydrographics Film/Hydro Dipping Film-Rule of Roller Derby Angels-50cmx400cm
ItemPackageDimensions_Height : 2.5 centimeters
ItemPackageDimensions_Length : 55 centimeters
ItemPackageDimensions_Width : 4 centimeters
ItemTypeKeyword : screen-printing-kits
Manufacturer : UniJade
Material : PVA
ModelName : Rule of Roller Derby Angels
ModelNumber : SK004-4
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : SK0004-4
ProductDescription : Water Transfer Printing/Hydro Dipping/Hrdrographics is the technique to transfer the pattern of the film to any object surface. Please follow the steps 1. Prep, Prime, and Paint your object Besides of ABS plastic, all other materials need to be painted with oil base paint in order to proceed water transfer printing. 2. Cut the film in proper size for your object It's important to consider the height of your object. Make sure the film is much bigger than the cover area of your object. 3. Tape 4 sides of the film In case of the pattern distortion and scattering after spraying activator. 4. Distinguish the hydrophilic side of the film Wet and use your thumb and index fingers to pinch the film for few seconds. After released, the sticking side is the hydrophilic side of the film. 5. Lay the film on water for more than 1min WITH the hydrophilic side face down Tap/drive the bubble out under the film if there is any. The lower water temperature is, the more time required for the film stay on water. 6. Spray activator in fine mist form evenly on the film to activate the film 7. Dip your object in 40degree angle into water slowly and steadily 8. Slightly shake your object in the water for few seconds after fully immersed 9. Take out your object and rinse the object surface with running water of faucet or shower-head It's important not to touch or rub the object surface before it's dry during/after rinsing. 10. Let the object dry naturally or by oven 11. Paint the clear paint for glossing and/or protection purpose for your object surface
ProductSiteLaunchDate : 2024-10-22T09:54:39.529Z
Seasons : All Seasons
Size : 50cm Widthx400cm Length
Style : Roller Derby
SubjectCharacter : Angels
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
Theme : Roller Derby
UnspscCode : 44102000
WarrantyDescription : FBA Warranty