Cart 2 india

Specification
AgeRangeDescription : Adult
ArtCraftKitType : Water Transfer Printing
Brand : STColor
BulletPoint1 : 50cm width, 1unit is 400cm length, 2units=800cm continuous length in a roll, and so on...
BulletPoint2 : Come to visit the vicious circus! The Hell Jokers are the best clown of the world.
BulletPoint3 : Suitable for White base color
BulletPoint4 : Good extensibility after activated
BulletPoint5 : Sealed packing to keep the film in good condition
BulletPoint6 : Sealing clip included for your film preservation
BulletPoint7 : Applicable with all brands of activators
Color : Blue, Colorful
ExternallyAssignedProductIdentifier : 8596387271994
GpsrSafetyAttestation : 1
IncludedComponents : Water Transfer Printing Film, Sealing Clip
ItemName : STColor SK008-Water Transfer Printing Film/Hydrographics Film/Hydro Dipping Film-Hell Jokers-50cmx400cm
ItemPackageDimensions_Height : 2.5 centimeters
ItemPackageDimensions_Length : 55 centimeters
ItemPackageDimensions_Width : 4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : screen-printing-kits
Manufacturer : UniJade
Material : PVA
ModelName : Hekk Jokers
ModelNumber : SK008
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PaintType : oil-based
PartNumber : SK0008
ProductDescription : Water Transfer Printing/Hydro Dipping/Hrdrographics is the technique to transfer the pattern of the film to any object surface. Please follow the steps 1. Prep, Prime, and Paint your object Besides of ABS plastic, all other materials need to be painted with oil base paint in order to proceed water transfer printing. 2. Cut the film in proper size for your object It's important to consider the height of your object. Make sure the film is much bigger than the cover area of your object. 3. Tape 4 sides of the film In case of the pattern distortion and scattering after spraying activator. 4. Distinguish the hydrophilic side of the film Wet and use your thumb and index fingers to pinch the film for few seconds. After released, the sticking side is the hydrophilic side of the film. 5. Lay the film on water for more than 1min WITH the hydrophilic side face down Tap/drive the bubble out under the film if there is any. The lower water temperature is, the more time required for the film stay on water. 6. Spray activator in fine mist form evenly on the film to activate the film 7. Dip your object in 40degree angle into water slowly and steadily 8. Slightly shake your object in the water for few seconds after fully immersed 9. Take out your object and rinse the object surface with running water of faucet or shower-head It's important not to touch or rub the object surface before it's dry during/after rinsing. 10. Let the object dry naturally or by oven. 11. Paint the clear paint for glossing and/or protection purpose for your object surface
ProductSiteLaunchDate : 2024-11-14T15:43:00.269Z
RecommendedUsesForProduct1 : Direct garment printing
RecommendedUsesForProduct2 : Cap
Seasons : All Seasons
Size : 50cm Widthx400cm Length
Style : Hell Joker
SubjectCharacter : Hell Jokers
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword1 : Unisex Adult
TargetAudienceKeyword2 : Unisex Teen
TargetGender : unisex
Theme : Jokers
UnitCount : 1
UnspscCode : 44102000
WarrantyDescription : FBA Warranty