Cart 2 india

Specification
Brand : Berkland
BulletPoint1 : Plug Any Void –– Easily patch large cracks with confidence when using this thick auto seam sealer. This single-component panel bond compound provides superior adhesion on bare, primed, or painted metal surfaces on your vehicle or RV. Seam sealer is black in color.
BulletPoint2 : Complete Kit –– Comes with nitrile gloves and an application tip to make the process seamless This joint and seam filler set comes with everything you need and more. The sealant is compatible with any standard caulking gun
BulletPoint3 : Permanently Fill Gaps –– Don't settle for a body panel adhesive sealant that doesn't hold up. Trust in a non-shrinking, non-cracking and low odor formula that stays remarkably flexible over time. Prevent leaks and debris from infiltrating your vehicle, and promote corrosion resistance
BulletPoint4 : Primer and Paint Ready –– Get your project ready for the road in just 24 hours. Smooth out and let the quick-curing seam sealant settle in for 45 minutes. Then you're ready to prime and paint the automotive body filler for a flawless finish that blends right in. Seam sealer is black in color.
BulletPoint5 : All-Weather Performance –– High heat and humidity are no match for this car sealant. Enhanced moisture curing properties ensure a durable hold for interior or exterior use. Use a urethane sealer that is worlds ahead of any solvent-based solutions
Color : Black
CompatibleMaterial : Bare Metal, Primed Metal, Painted Surfaces, Welded Joints, Aluminum, Galvanized Steel, Fiberglass, Plastics (Depending on the Specific Type of Plastic)
ExternallyAssignedProductIdentifier : 00850067728436
ExternallyAssignedProductIdentifier1 : 860011394778
ExternallyAssignedProductIdentifier2 : 0860011394778
FcShelfLife : 365 days
IncludedComponents : Nozzle and Nitrile Gloves
IsExpirationDatedProduct : 1
ItemForm : Paste
ItemName : Black Polyurethane Seam Sealer Automotive Compound Kit - Durable & Flexible Auto Body Filler - Seam & Joint Compound for Bare, Primed or Painted Surfaces - Automotive Seam Sealer [Black]
ItemPackageDimensions_Height : 23.7998 centimeters
ItemPackageDimensions_Length : 6.4008 centimeters
ItemPackageDimensions_Width : 6.604 centimeters
ItemTypeKeyword : automotive-paint-sealers
Manufacturer : Berkland
Material : Polyurethane
NumberOfItems : 1
PackageLevel : unit
PartNumber : BGBlackAutoSeamSealer
ProductDescription : **Superior Seal for Unparalleled Performance: Black Color**

For a quick fix with lasting hold, turn to this automotive sealant to get the job done right.

Properly patching voids demands durability. Set it and forget it with a body sealer that is non-shrinking, non-cracking, and low-odor.

Incredibly versatile, this auto body seal compound can be used on any bare, primed, or painted surface.

This auto sealant can fill all interior or exterior seams and joints.

From wheel wells to door panels, from floor pans to drip rails and more. This adhesive does it all.

Power through your project with this automotive body panel adhesive kit.

**Directions:**

**Primer or Painted Surface**
- Clean with a VOC-compliant cleaner and scuff using an abrasive pad
- Re-clean to remove debris before applying the seam sealer auto body compound
- Pierce the seal, install the nozzle, then remove the metal seal
- Insert the polyurethane adhesive sealant into a caulking gun and trim the nozzle
- Apply the seam binding compound and tool it to achieve the desired finish
- Allow 45 minutes for curing. For best results, wait 24 hours and scuff prior to painting

**Weld Through**
- Strip coatings around the weld flanges
- Apply the auto body seam sealer and brush to cover all bare metal
- Align and use a shunt clamp to hold before starting to weld

**Bare Metal**
- Clean with a VOC-compliant cleaner and grind or scuff weld nuggets or locations
- Re-clean to remove debris before applying the automotive panel bond adhesive compound
- Pierce the seal, install the nozzle, then remove the metal seal and trim the nozzle
- Apply the paintable seam sealer and tool it to achieve the desired finish
- Allow 45 minutes for curing. For best results, wait 24 hours and scuff prior to painting

**Additional Instructions:** Seam seal compound requires an ambient temperature of
ProductExpirationType : Expiration On Package
ProductSiteLaunchDate : 2024-07-09T19:10:07.984Z
Size : 2set
Style : Black Seam Sealer
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Door
UnitCount : 1
UnspscCode : 31201700
WaterResistanceLevel : waterproof