Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : Blysk
BulletPoint : Quart Automotive Primer
BulletPoint1 : ADHESIVE/SEAM SEALER: Firm, semi-flexible
BulletPoint2 : SPECIALLY DESIGNED: Sealing vertical and horizontal seams and joints
BulletPoint3 : MULTI-PURPOSE: Automobiles and Trucks applications
BulletPoint4 : APPLICATION: Bare metal, primed metal, SMC, FRP, fiberglass, aluminum and most plastics
BulletPoint5 : SPRAYABLE: Can be sprayed
Color : Burgundy
ColorCode : #800020
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Fiberglass
CompatibleMaterial4 : Aluminum
Coverage : Medium
ExternallyAssignedProductIdentifier1 : 0601968869373
ExternallyAssignedProductIdentifier2 : 601968869373
FinishType : Shimmery
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
IsWaterproof : False
ItemForm : Liquid
ItemName : BLYSK Fixed Flow Seam Sealer Gray SS05, Semi-Flexible, Excellent Adhesion to Bare Metal, Primed Metal, SMC, FRP, Fiberglass, Aluminum, and Plastics 200 ml/6.75 fl oz. Cartridge (3)
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-paint-sealers
ItemVolume : 4 fluid_ounces
Manufacturer : BLYSK
Material : Resin
NumberOfItems : 3
PaintType : Spray
PaintType1 : Enamel
PaintType2 : Acrylic
PaintType3 : Spray
PartNumber : SS05
ProductDescription :

A limited flow, firm, semi-flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members. Excellent adhesion to: bare metal, primed metal, SMC, FRP, fiberglass, aluminum, and most plastics*. Our automatic mixing system eliminates errors that are common in manual mixing.

 

DIRECTIONS:

1. Surface must be clean and free of dirt, grease, oil, rust, old seam sealer, and any other contaminants. 

2. Prime all bare metal with epoxy or urethane primer. Allow the primer to cure according to the manufacturer’s recommendations. 

3. Follow the BLYSK dual cartridge setup instructions for loading the cartridge into the dispensing gun. 

4. Dispense the Seam Sealer into the joint or seam. Smooth out if desired with a tool or finger and feather edge. 

5. Set up in approximately 5-10 minutes. 

6. Scuff or sand sealer with 320 grit sandpaper prior to priming or painting. 

7. Prime and paint per manufacturer’s specifications. 

 

TECHNICAL INFO: 

Mixed Color - Gray 

Mix Ratio - 1:1 

Work Time - 5-10 Minutes 

Handling Time - 10-20 Minutes 

Part Paintability - 20-30 Minutes 

Sealer Sandability - 20-30 Minutes 

Full Cure Strength - 6-8 Hours

ProductSiteLaunchDate : 2022-11-15T21:58:32.576Z
Size : 4 Ounce (Pack of 1)
SpecificUsesForProduct : Gun
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Metal, Plastic
UnitCount : 6.76
UnspscCode : 31201600
WaterResistanceLevel : water_resistant