Cart 2 india

Specification
Brand : ILOPM
BulletPoint1 : 5MP 4-in-1 TVI/AHD/CVI/CVBS 5inch CCTV Security Camera Tester
BulletPoint2 : Support CVBS + AHD (5MP) + TVI (5MP) + CVI (4MP) Camera
BulletPoint3 : This CCTV tester not supported Digital Multimeter
BulletPoint4 : The HD coaxial tester is developed for the on-site installation and maintenance of HD coaxial camera, having TVI, AHD,CVI.
BulletPoint5 : It also provides many useful functions, such as video display, PTZ control, DC12V output power, test, image generator, VGA video signal input, 1.0 signal input, RS485 data searching, cable testing, LED lamp etc.
Color : One Color
ExternallyAssignedProductIdentifier : 7509099252107
ItemName : CCTV Tester Monitor HD CCTV Tester Monitor AHD 5MP 1080P 720P Analog Tester VGA Input DC12V Analog Tester, CCTV Monitor Professional Testing Tools
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 26 centimeters
ItemPackageDimensions_Width : 16 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : surveillance-monitors
Manufacturer : ILOPM
ModelName : 255203614
ModelNumber : 255203614
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 255203614
ProductDescription : Funtions:
Video Signal Testing
Vedio monitor tester, High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality.

PTZ Controller
Video monitor tester built-in Pelco-D / P PTZ control protocol, etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, aperture size.

Image Generator
Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section.

DC12V 1A Output Power
Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.

Testing
Test the input from pickup devices. Connect the tester and pickup device with the cable.
Enhanced Network Cable Testing
By UTP CABLE TEST port on the meter, you can test the connection of network cable.
VGA/ Input
Support VGA/ 1.0 video input, once connect VGA/ video, please switch selector to select or VGA mode. The maximum resolution is1920 x 1440.
TVI Camera Test
HD TVI video surveillance testing, support 1MP 2MP 3MP 4MP 5MP. When TVI signal input, the tester will display HD TVI camera image.
AHD Camera Test
HD video surveillance testing, support AHD 2.0 version, 1MP 2MP 3MP 4MP 5MP. When AHD signal input, the tester will display the AHD camera image.
CVI Camera Test
HD CVI video surveillance testing, support 1MP 2MP 3MP 4MP. When CVI signal input, the tester will display HD CVI camera image.
LED Lamp
It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.
The Battery Graphic Display
The tester has advanced power control and protection circuit, low-power energy-saving, 4 to 5 hours on a single charge, can be used normally for 12 hours.

Packag
ProductSiteLaunchDate : 2024-11-12T03:30:59.699Z
Size : One Size
UnitCount : 1
UnspscCode : 43211900