Cart 2 india

Specification
Brand : HIPICCO
BulletPoint : Bearings
BulletPoint1 : R1038ZZ Bearings,(I.D.=3/8", O.D.=5/8", Thickness=5/32");
BulletPoint2 : Precision metric miniature ball bearing, both sides rubber sealed, pre-lubricated with grease
BulletPoint3 : Made of chrome steel (GCr15), durability and resistance to under heavy loads
BulletPoint4 : Low noise Z2, ABEC Tolerance 1 (P0), High speed. High temperature resistance. Resistance to high load.
BulletPoint5 : Application: Widely used in Electric Fans, Automotives, RC Cars, RC Planes, RC Helicopters, Surgical Equipment, Household Electrical Appliances, Medical Instruments, Surveillance Systems, Plastic Card Printers, Robotics, Pulmonary Assist Devices, Cryogenic Coolers, Flow Meters, Fuel Control, among others.
Color : silver
ExternallyAssignedProductIdentifier : 7375604644336
GpsrSafetyAttestation : 1
IncludedComponents : Deep Groove Bearings
ItemName : HiPicco R1038ZZ Deep Groove Ball Bearings, ID 3/8" x OD 5/8" x Width 5/32" Miniature Bearings, Double Metal Shielded Ball Bearing Chrome Steel Z2 Lever 5pcs
ItemPackageDimensions_Height : 0.4 centimeters
ItemPackageDimensions_Length : 1.6 centimeters
ItemPackageDimensions_Width : 1.6 centimeters
ItemPackageQuantity : 5
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : Hipicco
Material : Alloy Steel
ModelNumber : R1038ZZ
NumberOfBoxes : 1
NumberOfItems : 5
PackageLevel : unit
PartNumber : H20220831111
ProductDescription :

Specification：

• Model: R1038ZZ
• Seal Type: Double Shielded
• Inner Race/Outer Race Material: Chrome Steel (GCr15)
• Cage Material: Stamping Steel
• Inner Diameter (d): 3/8"
• Outer Diameter (D): 5/8"
• Thickness (B): 5/32"
• Accuracy Class: P0 (ABEC-1)
• Noise Level: Z2
• Number of Pack: 5 Pcs

Feature:

• Single-row, pre-lubricated, normal accuracy.
• Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
•  With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
• These cost-effective bearings are widely used in areas with low requirements for Mohs hardness.
•  Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.

Selecting Guide:

• Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
• Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

ProductSiteLaunchDate : 2023-09-01T06:52:52.182Z
Size : R1038ZZ 3/8" x 5/8" x 5/32"
SpecificationMet : ABEC 1
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 31171500