Cart 2 india

Specification
Brand : Shorpioen
BulletPoint1 : A fastener with unified thread pitch and a cylindrical, low profile head with small, rectangular ribs protruding from the underside of the head. The top of the head is flat and is flush with the mating surface when installation is complete. Below the ribs and above the first thread is an annular groove which helps to hold the fastener in position.
BulletPoint2 : Intended for metal panel-to-panel applications and well-suited for use in printed circuit boards. A hole is pierced into the circuit board and the unit it is attached to. The stud is inserted using a hand press or by hand, applying parallel squeezing fo
BulletPoint3 : As the application force is applied, part of the sheet cold flows into an undercut under the head, making the fastener an integral part of the sheet.
ExteriorFinish : Stainless Steel,Metal,Carbon Steel,Steel
ItemName : 10-32X1 Self Clinching Stud Full Thread Hardened Steel Heat Treat Zinc (Pack Qty 6,000) BC-1116SCN by Shorpioen
ItemPackageQuantity : 6000
ItemTypeKeyword : self-clinching-nuts
Manufacturer : Shorpioen LLC
Material : Zinc
MeasurementSystem : Inch
MetalType1 : Stainless Steel
MetalType2 : Carbon Steel
MetalType3 : Alloy Steel
ModelNumber : BC-1116SCN
NumberOfItems : 6000
PartNumber : BC-1116SCN
ProductDescription : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot. A fastener with unified thread pitch and a cylindrical, low profile head with small, rectangular ribs protruding from the underside of the head. The top of the head is flat and is flush with the mating surface when installation is complete. Below the ribs and above the first thread is an annular groove which helps to hold the fastener in position.. Intended for metal panel-to-panel applications and well-suited for use in printed circuit boards. A hole is pierced into the circuit board and the unit it is attached to. The stud is inserted using a hand press or by hand, applying parallel squeezing forces. A hex nut is twisted onto the stud, securing it from the back. As the nut is tightened, the ribbed stud head grips the front panel to secure the application from the front as well, eliminating the need for welding.. As the application force is applied, part of the sheet cold flows into an undercut under the head, making the fastener an integral part of the sheet..
ProductSiteLaunchDate : 2017-01-04T15:00:25.918Z
Size : 10-32X1
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 31161500