Cart 2 india

Specification
Brand : Korpek.com
BulletPoint1 : Designed for use in thin sheet metal when load bearing threads are necessary. The nut is pressed into a pre-drilled or punched hole, then force is applied to the top of the nut until the bearing surface at the outside diameter of the bottom of the nut is flush with the sheet metal to which it is attached.
BulletPoint2 : Steel: Carbon steel Stainless Steel: Type 303 stainless passivated to ASTM A 380
BulletPoint3 : Nuts are case-hardened
BulletPoint4 : Suitable for a 0.1" thick mounting plate, the mounting hole diameter is about 0.17.
BulletPoint5 : Perfect for applications where a thin sheet requires load-bearing threads but still must remain smooth, with no protrusions on either surface.
ExteriorFinish : Stainless Steel,Zinc,Carbon Steel,Steel,Metal
ItemName : 4-40-1 Self Clinching Nut Zinc (Pack Qty 10,000) BC-04-1NCL by Korpek
ItemPackageDimensions_Height : 13.5 centimeters
ItemPackageDimensions_Length : 2.3 centimeters
ItemPackageDimensions_Width : 9.2 centimeters
ItemPackageQuantity : 10000
ItemTypeKeyword : self-clinching-nuts
Manufacturer : Korpek LLC
Material : Zinc
Material1 : Stainless Steel
Material2 : Steel
MeasurementSystem : Inch
MetalType : Carbon Steel
MetalType1 : Stainless Steel
MetalType2 : Carbon Steel
MetalType3 : Alloy Steel
ModelNumber : BC-04-1NCL
NumberOfItems : 10000
PartNumber : BC-04-1NCL
ProductDescription : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot. Designed for use in thin sheet metal when load bearing threads are necessary. The nut is pressed into a pre-drilled or punched hole, then force is applied to the top of the nut until the bearing surface at the outside diameter of the bottom of the nut is flush with the sheet metal to which it is attached. . Steel: Carbon steel Stainless Steel: Type 303 stainless passivated to ASTM A 380 . Nuts are case-hardened. Machine Pack Count - Margin error of +/- 5%
ProductSiteLaunchDate : 2021-02-08T18:56:03.854Z
Size : 4-40-1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 31161700