Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Walfront
BulletPoint : Fuse
BulletPoint1 : Can detect a flame or the light of 760~ 1100nm wavelength, lighter flame test distance of 80cm, for the greater flame, the farther the distance test
BulletPoint2 : The detection angle is about 60 degrees, particularly sensitive to the flame spectrum
BulletPoint3 : Sensitivity is adjustable (shown in blue digital potentiometer adjustment)
BulletPoint4 : Comparator output, clean, good waveform, strong driving ability, more than 15mA
BulletPoint5 : With adjustable preciseness potentiometer for sensitivity adjustment
Color : Blue
ConnectorType : Screw
ExternallyAssignedProductIdentifier : 7604643741608
ExternallyAssignedProductIdentifier1 : 741870391811
ExternallyAssignedProductIdentifier2 : 0741870391811
ItemName : 5 Pcs IR Infrared Flame Sensor Module Detector Smartsense for 3.3V-5V Wide Voltage LM393 60 Degrees
ItemPackageDimensions_Height : 12 centimeters
ItemPackageDimensions_Length : 2 centimeters
ItemPackageDimensions_Width : 7.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sensor-blocks
Manufacturer : Walfront
Material : Copper
ModelName : FFDUNUNP
ModelNumber : 0741870391811
MountingType : Screw Mount
NumberOfBoxes : 1
NumberOfContacts : 1
NumberOfItems : 1
NumberOfPoles : 1
NumberOfPositions : 1
PartNumber : Walfront
ProductDescription : Specifications:
The working voltage: 3.3V-5V
The output format: DO digital switching outputs (0 and 1) and AO analog voltage output
Comparator: wide voltage LM393
Length: 4.5cm / 1.77in
Weight: 4g

Product wiring description:
VCC: 3.3-5V power supply "+"
GND: power supply "-"
DO:  TTL switch output.
AO: analog output (voltage )

Instructions for use:
1. the flame sensor is most sensitive to flame, for ordinary light, it is also responsive
, generally used as a flame alarm purposes.
2. the output interface can be directly connected to the micro-controller IO port.
3. The sensor must be kept at a distance from the flame to avoid damage to the sensor.Lighter flame test distance of 80cm, for the greater flame, the farther the distance test
4. Analog output and the AD conversion process, can achieve higher accuracy
5. When the sensor detects a flame,  sunlight, or infrared light, if achieve potentiometer setting threshold, the green indicator light will ON, the DO output low level (0-0.1 - V), the green light is OFF, the DO output about 3 V high voltage level

Package included:
5 x  IR Flame Sensor Module
ProductSiteLaunchDate : 2018-05-12T03:11:38.325Z
Size : One Size
UnitCount : 1
UnspscCode : 46191500
Voltage : 5 volts_of_direct_current