Cart 2 india

Specification
Brand : Garosa
BulletPoint1 : [Small Size, Versatile Usage] With its compact size, this sensor module is for use in robots or interactive projects. It can be easily integrated with any 3-5V power supply or logic microcontroller, making it suitable for a wide range of applications.
BulletPoint2 : [Easy Device Control] Utilizing an I2C interface, this sensor module provides convenient device control and data . It also features two programmable GPIO pins, offering flexibility in various projects.
BulletPoint3 : [Fast and Accurate] The VL6180X Sensor Module ensures fast and accurate distance ranging. It can handle distances from 5mm to 100mm, making it suitable for a wide range of applications. The measurements are based on object-independent self-illuminating beam reflection, providing results.
BulletPoint4 : [Integrated Optical Module] The VL6180X is equipped with an intelligent optical module that offers proximity sensing, ranging, and other advanced functions. Its self-illuminating beam reflection measurement allows for fast and distance measurements.
BulletPoint5 : [Accurate Distance Measurement] The VL6180X Sensor Module uses time-of- technology to accurately measure distances from 0 to 100mm or more. Unlike traditional infrared sensors, it relies on an accurate clock to measure the time it takes for light to the , resulting in higher accuracy.
IncludedComponents : No
ItemName : Distance Measuring Sensor Module, VL6180X Range Finder Optical Ranging Sensor Module Gesture Recognition ForDistance Measurement, Sensor Blocks
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : sensor-blocks
Manufacturer : Garosa
Material : Copper
ModelNumber : Garosaaop5kdzi4u
NumberOfItems : 1
PartNumber : Garosaaop5kdzi4u
ProductDescription : Specification:
Pin Definition:
Power supply pin:
VIN - Power input pin. Voltage input range 3-5V;
2v8 - Output port, 2.8V output voltage generated by the on-board voltage regulator processing the input voltage of VIN;
GND - Power supply ground;
I2C communication pin:
SCL - I2C clock pin, connected to the master SCL;
SDA - I2C data pin, connected to the master SDA;
Control pin:
GPIO - Pin that the sensor uses to indicate the data ready. Note that the pin output is 0-2.8V high and low level. This pin may not be applied to boards such as for(These boards are 3.3 or 5V high level), need to add level conversion if applied.
SHDN - Shutdown pin of the sensor. By default it is pulled high. There is a level conversion diode so you can use 3-5V logic on this pin. When the pin is pulled low, the sensor enters shutdown mode.

Package List:
1 x Sensor

ProductSiteLaunchDate : 2024-06-17T14:25:13.428Z
UnspscCode : 46171600