Cart 2 india

Specification
Brand : DQUONLOV
BulletPoint : Relays
BulletPoint1 : Without a display function, the data is read out via the TTL interface
BulletPoint2 : Mainly used to measure AC voltage, current, active power, frequency, power factor and active energy
BulletPoint3 : Equipped with TTL to USB data cable
BulletPoint4 : This product contains PC software
BulletPoint5 : The measurement range is AC 80-260V, the maximum current can 100A
Color : 5v 2 Channel
ExternallyAssignedProductIdentifier : 8017265375745
ItemName : DQUONLOV 5V 12V 1 2 4 6 8 Channel Relay Module with Optocoupler Relay Output X Way Relay Module for(5v 2 Channel)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sensor-blocks
Manufacturer : DQUONLOV
ModelName : DQUONLOV
ModelNumber : DQUONLOV
NumberOfItems : 1
PartNumber : DQUONLOV
ProductDescription : Relays
1 Channel:
Thenew5VRelayModule
Canbeusedasmicrocontrollerdevelopmentboardmodulecanbeusedashomeappliancecontrol
5V-12VtoTTLcontrolsignal
ThecontrolsignalDCorAC,220VACloadcanbecontrolled.
Thereisanormallyopenandonenormallyclosedcontact
Apowerindicatorlight
Acontrolindicator,pulloff,disconnectdoesnotshine
Transistordrivetoincreasetherelaycoilcontrolpinshighimpedance.
Thecontrolpinhasapull-downcircuittopreventmalfunctionrelayvacant
2 Channel:
The new 5V Relay Module
Can be used as microcontroller development board module can be used as home appliance control
5 V-12V to TTL control signal
The control signal DC or AC, 220V AC load can be controlled.
There is a normally open and one normally closed contact
A power indicator light
A control indicator, pull off, disconnect does not shine
Transistor drive to increase the relay coil control pins high impedance.
The control pin has a pull-down circuit to prevent malfunction relay vacant
4 Channel:
The new 5V Relay Module
Can be used as microcontroller development board module can be used as home appliance control
5 V-12V to TTL control signal
The control signal DC or AC, 220V AC load can be controlled.
There is a normally open and one normally closed contact
A power indicator light
A control indicator, pull off, disconnect does not shine
Transistor drive to increase the relay coil control pins high impedance.
The control pin has a pull-down circuit to prevent malfunction relay vacant.
8 Channel:
The new 5V Relay Module
Can be used as microcontroller development board module can be used as home appliance control
5 V-12V to TTL control signal
The control signal DC or AC, 220V AC load can be controlled.
There is a normally open and one normally closed contact
A power indicator light
A control indicator, pull off, disconnect does not shine
Transistor drive to increase the
ProductSiteLaunchDate : 2024-09-02T10:56:18.044Z
Size : One Size
UnitCount : 1
UnspscCode : 39120000