Cart 2 india

Specification
Brand : Wisoqu
BulletPoint : 1pcs HMC5883L 3V-5V Three 3 Triple Axis Magnetic Field Compass Magnetometer Sensor Module for IIC Board HMC-5883L
BulletPoint1 : This transmitter module is compact, easy to install and convenient to use.
BulletPoint2 : The silver alloy contacts have good conductivity and quick response.
BulletPoint3 : This large area heat dissipation of the transmitter module can run for a longer time.
BulletPoint4 : The application scope of the transmitter module is in remote data acquisition and control equipment.
BulletPoint5 : The input frequency range of this module is 5Hz～500Hz, and the efficiency is fast.
GpsrSafetyAttestation : 1
ItemName : PWM to Voltage Module, 5 Hz~500 Hz Transmitter Module Linear Conversion Board PWM to Voltage Module Industrial Supplies, 4~24V Input 0~5V / 0~10V Output
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemTypeKeyword : sensor-blocks
Manufacturer : Wisoqu
ModelName : Liebewhwhf47vocgi
ModelNumber : Wisoque72qukrg6o
MountingType : Flange Mount
NumberOfItems : 1
PartNumber : Wisoque72qukrg6o
ProductDescription : Specification:
Item Type: Transmitter Module
Material: PCB
Power Supply Voltage: 9V ~ 24V
Input Voltage Range: 4～24V
Input Frequency Range: 5Hz～500Hz
Input Duty Ratio Range:
Output Voltage: 0.00V ～ 5.00V/0.00V ～ 10.00V
Input Method: J1 Pad On The Circuit Board: The default is open circuit, which has not been used yet.
Output Mode: J2 Pad On The Circuit Board: Open circuit (output 0.00V ~ 5.00V); short circuit (output 0.00V ~ 10.00V), the default is open circuit.
Application Scope: Remote data acquisition and control equipment;
Module Interface:
24V: Power supply positive port (9V ~ 24V)
G: Power ground interface
IN: input positive interface
G: input negative port
OUT: output interface (0.00V ～ 5.00V/0.00V ～ 10.00V)
G: Power ground interface
Output (0.00V ～ 5.00V) Resolution: 0.050V/D (Volt/Duty Cycle)
Output (0.00V ～ 10.00V) Resolution: 0.100V/D (Volt/Duty Cycle)
Calculate The Measured Duty Cycle Method: (output voltage (V)/resolution) = duty cycle (%)
For Example: Output (0.00V ~ 5.00V) output is 2.5V
(2.5(V)/0.05) = 50(%)

Package List:
1 x PWM to Voltage Module

Note:
When the output is 0.00V to 10.00V, the power supply voltage must be 15V.
ProductSiteLaunchDate : 2024-08-02T12:19:29.757Z
UnspscCode : 39121400