Cart 2 india

Specification
Brand : LIAPDG
BulletPoint1 : [Excellent Material] Tire changer oil catcher featuring high-quality plastic housing, it is very strong. The pressure gauge with dual scales and clear values provides precise and stable measurements and allows you to observe the pressure values in real-time
BulletPoint2 : [Thoughtful Design] The bowl with visible holes not only effectively protects the cup but also facilitates rapid observation of the volume of water and oil in the cup to adjust the amount of single supplied lubricating oil and reduce waste. Equipped with a standard air inlet connector, air inlet connector of the tire changer, and air outlet connector, it can realize convenient and tight connection
BulletPoint3 : [Easy to Install] With a mounting bracket with reserved screw holes, it can be installed on the wall in a short time. It can effectively separate oil and water to obtain clean and dry air. Its smooth surface can be easily cleaned and maintained with wet rags
BulletPoint4 : [Complete Accessories] In addition to the oil-water separator, the package comes with a pressure gauge, connectors and mounting accessories for your use and installation, without the need for additional purchase. It is suitable for tire changers
BulletPoint5 : [High-performance] Tire changer oil water separator thickened housing and good sealing allows it to support a maximum pressure of 145Psi, improving the efficiency and performance of the tire changer
FitType : Universal
IncludedComponents : Tire Changer Oil Water Separator
ItemName : LIAPDG Tire Changer Oil Water Separator, Tire Changer Air Pressor with Pressure Gauge Manual Drainage Max. Pressure 10 Bar/145 Psi/1 Mpa Max. Temperature 60°C/140°F 4.01 x 1.57 x 7.6 Inch
ItemPackageDimensions_Height : 3.14 inches
ItemPackageDimensions_Length : 8.66 inches
ItemPackageDimensions_Width : 5.11 inches
ItemPackageQuantity : 1
ItemTypeKeyword : compressed-air-separators
Manufacturer : LIAPDG
MaximumOperatingPressure : 17 bars
ModelName : Oil Separator
ModelNumber : Compatible with Atlas Copco
NumberOfItems : 1
PartNumber : Tire Changer Oil Water Separator
PowerSourceType : Corded Electric
ProductDescription :

Specifications:

Material: Plastic

Color: Silver

Type: Lower Air Outlet

Drainage: Manual

Max. Pressure: 10Bar/145Psi/1Mpa

Max. Temperature: 60°C/140°F

Product Size: 10.2*4*19.3cm/4.01*1.57*7.6in  

Gross Weight: 0.72kg/1.58lbs

  

Package Included:

1* Tire Changer Oil Water Separator  

1* Pressure Gauge

1* Mounting Bracket 

3* Connectors

2 * Screws

2 * Nuts

Notes:

1. When installing, make sure that the direction of the airflow corresponds to the direction of the arrow on the product body.

2. You have to drain the water when the water level exceeds the upper limit.

3. Please clean the dirt out of the connecting pipes and fittings before installation to avoid bringing in air systems.

4. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

ProductSiteLaunchDate : 2025-05-07T06:25:50.257Z
RecommendedUsesForProduct : Air Brushing
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 0.01
UnspscCode : 25170000