Cart 2 india

Specification
Brand : waveshare
BulletPoint1 : 2-CH UART to Ethernet Converter, serial port transparent transmission module. Embedded Ethernet MAC and PHY layers. Bi-direction transparent data transmission between UART and Ethernet. 10/100M, full-duplex/half-duplex auto-negotiation Ethernet interface, 802.3-compliant.
BulletPoint2 : Auto-MDI/MDIX, detect and switch cable type automatically. Supports DHCP auto-obtained IP and DNS domain access. Network parameter configuration like chip operating mode, port, IP, via host computer software or UART command.
BulletPoint3 : Four operating modes: TCP CLIENT, TCP SERVER, UDP CLIENT, UDP SERVER. 2-CH UART concurrent operation, standalone transparent transmission for each channel. Full-duplex or half-duplex UART communication, supports RS485 RX/TX auto switch. Supports virtual serial port software (provided). KEEPALIVE mechanism support.
BulletPoint4 : Application scenario : Bi-direction transparent transmission between UART TTL and wired Ethernet; Extend the communication distance for serial devices; Manage multi serial client devices remotely via one web server; Manage serial server remotely via multi web clients
BulletPoint5 : 3.3V/5V Operating voltage. 140mA Operating current. TCP/UDP Operating mode. 300bps ~ 921.6Kbps UART baudrate. UART TTL level:compatible 3.3V / 5V
Color : 2-CH UART To Ethernet Converter
CompatibleDevices : Desktop
CompatibleDevices1 : Personal Computer
CompatibleDevices2 : Laptop
CompatibleDevices3 : Smartphone
ConnectorGender : Male-to-Female
ConnectorType : Serial
ConnectorType1 : Auxiliary
ConnectorType2 : DB9 9 Pin
ControlMethod : application
CurrentRating : 1 amps
CustomerPackageType : loose
DataLinkProtocol : Ethernet
DataTransferRate : 100 megabits_per_second
ExternallyAssignedProductIdentifier1 : 755291678338
ExternallyAssignedProductIdentifier2 : 0755291678338
FinishType : Abs
HardwareInterface : ethernet
IncludedComponents : DB-9 RS-232 Converter Cable
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
InputVoltage : 5 volts
ItemName : 2-Channel UART to Ethernet Converter, Serial Port Transparent Transmission Module UART TTL and RJ45 Ethernet Bi-Directional Transmission, with Control Pin for Raspberry Pi/Arduino/STM32,ect.
ItemPackageDimensions_Height : 6.8072 centimeters
ItemPackageDimensions_Length : 2.3876 centimeters
ItemPackageDimensions_Width : 5.3086 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : computer-cable-serial-adapters
LowerTemperatureRating : -20 degrees_celsius
Manufacturer : Waveshare
Material : copper
MaximumVoltage : 5 volts
ModelName : XBL-AV-10037
ModelNumber : BC-2-CH UART To Ethernet Converter-W
MountingType : DIN Rail Mount
MountingType1 : Panel Mount
MountingType2 : DIN Rail Mount
NominalPower : 5 watts
NumberOfContacts : 37
NumberOfItems : 2
NumberOfPins : 40
NumberOfPoles : 37
NumberOfPorts : 1
OperatingSystem : Windows, macOS, Linux
PartNumber : BC-2-CH UART To Ethernet Converter-W
PowerPlugType : no_plug
ProductDescription : Overview
The 2-CH UART TO ETH provides an easy way to communicate between UART TTL and RJ45 Ethernet, allowing bi-directional transparent data transmission. It is easy to use, along with features like fast data rate, low power consumption, high stability, suits applications such as safety & security, IoT, and so on.

Features
(1). Embedded Ethernet MAC and PHY layers
(2). Bi-direction transparent data transmission between UART and Ethernet
(3). 10/100M, full-duplex/half-duplex auto-negotiation Ethernet interface, 802.3-compliant
(4). Auto-MDI/MDIX, detect and switch cable type automatically
(5). Supports DHCP auto-obtained IP and DNS domain access
(6). Network parameter configuration like chip operating mode, port, IP, via host computer software or UART command
(7). Four operating modes: TCP CLIENT, TCP SERVER, UDP CLIENT, UDP SERVER
(8). 2-CH UART concurrent operation, standalone transparent transmission for each channel
(9). Full-duplex or half-duplex UART communication, supports RS485 RX/TX auto switch
(10). Supports virtual serial port software (provided)
(11). KEEPALIVE mechanism support
(12). Comes with development resources and manual (examples for Pico/Raspberry Pi/Arduino/STM32)

Package Content

2-CH UART TO ETH x1

Note
Development Resources and Technical Support are provided, please feel free to contact us if you have any problem!


ProductSiteLaunchDate : 2021-09-05T06:54:54.809Z
RecommendedUsesForProduct : controlling devices and displays requiring RS-232 serial control
Size : 3.3V (Raspberry Pi)
SpecificationMet1 : FCC
SpecificationMet10 : RoHS
SpecificationMet11 : ISO 9001
SpecificationMet12 : cUL
SpecificationMet13 : EAC
SpecificationMet14 : SAE
SpecificationMet15 : CSTB
SpecificationMet16 : CQC
SpecificationMet17 : KEMA-KEUR
SpecificationMet18 : DNV GL
SpecificationMet19 : IEC
SpecificationMet2 : LR
SpecificationMet20 : ATEX
SpecificationMet21 : SGS
SpecificationMet22 : ISO 9000
SpecificationMet3 : Energy Rating
SpecificationMet4 : UL
SpecificationMet5 : CSA
SpecificationMet6 : CE
SpecificationMet7 : MIL-SPEC
SpecificationMet8 : IECEE CB
SpecificationMet9 : VDE
SpecificUsesForProduct : Electronic
SpecificUsesForProduct1 : USB to Serial
SpecificUsesForProduct2 : USB to UART
SpecificUsesForProduct3 : USB to RS485
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 43220000
UpperTemperatureRating : 50 degrees_celsius
Voltage : 60 volts
WarrantyDescription : 1 Year Manufacturer