Cart 2 india

Specification
Brand : DTECH
BulletPoint1 : Powered RS232 to RS485 converter converts RS-232 signals to 2 wire half-duplex RS-485 signal, to extend RS232 signal distance, also expands RS485 networks ( up to 3 way)
BulletPoint2 : Compact RS 232 to 485 adapter is designed with 600W lightning surge protection over RS485 link and 15KV ESD over RS232 link, to protect your value devices against high voltage
BulletPoint3 : Serial adapter with TX, RX and power indicators enables you to easily know the status of sending/receiving data respectively; 9V-30V DC power input is supported (DC 9V power adapter is included)
BulletPoint4 : RS485 hub features built-in data collision protection control for reliable serial Data Communication; The baud rate will be detected and adjusted automatically, 300-115200 bps
BulletPoint5 : Wall mountable bi-directional RS232 to RS485 splitter hub provides a quick, simple, and cost-effective solution for various serial data communication and automation applications
Color : Silver
CompatibleDevices : Computer
ConnectorType : DB9
CurrentRating : 0.5 amps
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 6945279559320
InputVoltage : 30 volts
ItemName : DTECH Industrial Grade RS232 to RS485 Serial Converter 3 Channel RS-485 Expansion Hub with 600W Surge Protection TX RX LEDs Power Adapter Terminal Block
ItemPackageDimensions_Height : 24.2 centimeters
ItemPackageDimensions_Length : 5.8 centimeters
ItemPackageDimensions_Width : 14.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : computer-cable-serial-adapters
Manufacturer : guangzhouditedianzikejiyouxiangongsi
ModelNumber : DT-9016
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : DT-9016
PowerPlugType : no_plug
ProductDescription : Asynchronous Half Duplex Communication

This RS485 to RS232 converter allows to interface your devices using an RS232 communication link to an RS485 link and vice-versa.

A built-in transient voltage suppressor (TVS) enables you to get double 600W lightning surge protection against the lightning strike over RS485 link, and 15KV static protection over RS232 link effectively protect your value devices against high voltage spikes. Simple Operation
DCPC (Data Collision Protection Control) function can detect the incoming or outgoing data and automatically switch into the send or receive mode, then you don't have to worry about the data collision problems.

It only requires three lines (RX, TX and GND) to get a RS232 to RS485 conversion, making it great for troubleshooting the serial system, fully plug and play.

Standards: EIA RS-232C, RS-485
RS-232 signal: TX, RX, GND (DB9 Female connector)
RS-485 signal: D+, D-, GND (Removable 8-pin terminal block with screws, 3 channels RS485 splitter)
Speed: Auto tuner baud rate, 300 bps~115200 bps
Load Capacity:10 nodes for each channel, max 32 nodes for 3 RS485 channels
Max distance: 1.2km
Data direction auto-turnaround, no flow control is necessary
Protection: 15KV ESD over RS232 link; 600W lightning surge protection over RS485 link
Power Consumption 180Ma@9V
Power Input:9V ~ 30V DC 300Ma
Transmission Media - twisted pair (>=24 AWG ) or shielded cable.

Applications
Computer
Factory industrial automation control system
Micro controller (MCU)
Door safe / Parking system
SCADA (supervisory control and data acquisition)
...

Package Content
1 x RS-232 to RS-485 Converter Hub
1 x DB male to female cable
1x DC 9V 0.5A power adapter
1 x User Manual
ProductSiteLaunchDate : 2020-11-20T00:00:00.000-08:00
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
UnitCount : 1
UnspscCode : 43200000
WarrantyDescription : 365 days from the date of the purchase
WarrantyType : Limited