SpecificationBrand : UMLIFE
BulletPoint1 : Supports 3-5.5V power supply.
BulletPoint2 : Uses: Microcontroller, ARM, FPGA, for Arduino and other MCU's TTL serial port communicates with RS232 level devices. Serial expansion of the device. RS232 port communication with Computer PC.
BulletPoint3 : RS232 port communication with computer PC.
BulletPoint4 : Can be used for GPS, electronic compass, car detection, hard disk maintenance etc
BulletPoint5 : In order to facilitate the use of the product, each pin is marked, and a schematic diagram of the product is printed on the back of the product.
CompatibleDevices : gps
ConnectorType : Serial Adapter
ExternallyAssignedProductIdentifier1 : 701715466128
ExternallyAssignedProductIdentifier2 : 0701715466128
ItemName : UMLIFE 3pcs TTL to RS232 Module TTL RS232 Mutual Conversion Module Serial Level Conversion to SP232 for MCU, ARM, FPGA, for Arduino TTL Serial Port communicates with RS232 Level Device
ItemPackageDimensions_Height : 10.1092 centimeters
ItemPackageDimensions_Length : 0.7112 centimeters
ItemPackageDimensions_Width : 6.1976 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : computer-cable-serial-adapters
Manufacturer : UMLIFE
ModelNumber : 8bf9f355-a9ea-41c6-a8b3-aa6e5b443a5a
NumberOfPorts : 1
PartNumber : AUB091TN2ZPY
ProductDescription :
Instructions for use:
(Taking the access MCU as an example, how to connect each row of pins)
TTL (UART) side:
VCC: DC 3V-5.5V
GND: Connect to GND
TXD: Connect to MCU.RX (Signal Flow: MCU.RX ← SP3232 ← RS232.TX )
RXD: Connect to MCU.TX (Signal Flow: MCU.TX → SP3232 → RS232.RX)
CTS, RTS is not used by default.
RS232 side:
RXD: Connect RS232.TX (Signal Flow: RS232.TX →SP3232 → MCU.RX)
TXD: Connect to RS232.RX (Signal Flow: RS232.RX ←SP3232 ← MCU.TX)
GND: Connect to RS232.GND
CTS, RTS is not used by default.
Package Included:
3 pcs TTL to RS232 Module
ProductSiteLaunchDate : 2021-04-06T09:33:29.713Z
SpecificUsesForProduct : GPS
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 3
UnspscCode : 43201400