Cart 2 india

Specification
Brand : AYNEFY
BulletPoint1 : [All-in-one-debugging tool]-Covering isolation conversion between USB, RS-232, RS-485/422 and TTL, whereby the need for additional devices is eliminated.
BulletPoint2 : [Seamless connection] - Simply connect your device via USB, install the driver and use it immediately.
BulletPoint3 : [Direct USB performance] -driven directly by the USB connection and the need for an external power supply eliminated.
BulletPoint4 : [Flexible conversion]-Sight between USB and RS-232, RS-422/485 and TTL with support for bidirectional conversion.
BulletPoint5 : [Standard connections] equipped with a standard USB-B-Square connection, a male connection of DB9 RS-232 and plug-in clamps for RS-485/422.
ItemName : Isolated 6-in-1 FT232 USB/485/422/232/TTL Serial Port Module Converter for Electronic Component
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemTypeKeyword : computer-serial-port-cards
Manufacturer : AYNEFY
ModelNumber : AYNEFYthqxdnezmi
NumberOfItems : 1
ProductDescription : 1. Insulation 6-in-1-Debugging tool, no jumper, DIP switch, etc. required, an insulation conversion between USB, RS-232, RS-485/422, TLL level can implement
2. YN-4561I is compatible and supported with the USB 2.0 standard, OS X, and operating systems. Simply connect your device via the USB interface, install the driver to use it immediately
3. 1KV isolation between USB, RS - 232, RS -485/422, TLL, supports mutual conversion between USB and RS - 232, USB and RS - 422/485, USB and TTL, TTL and RS - 422/485, RS232 and RS -422/485
4. No external power supply, take electricity from the USB port, support for WindowsxP / Server2003 / Vista / 7/8 / 8.1 / 10 / OS X, for, for, for
5. Standard USB-B-square connection, device is supplied with a turn-B cable, RS232 takes over the standard serial DB9 port connector, / 422 is a plug-in terminal

Technical data:
Article type: module for serial connection
Material: ABS
Model: yn4561i
USB compatibility: Compliance with the USB 2.0 standards, supports hot swap plug-and-play
Port design
USB: Standard B square connection, device is supplied with a turn-B cable
RS232: Standard DB9 serial connection male
/422: plug -in connection
TTL: plug -in connection
Transmission rate: 1200 BPS - 115.2 Kbps
TestBit: odd exam, straight test, no examination
Database: 5, 6, 7, 8
Stopbit: 1, 1.5, 2
RS232: TX, RX, GND, corresponds to TIA / EIA-232
: D+, D- Balance difference half-duplex, according to TIA/EIA-485 standard
RS422: T+, T-, R+, R-Balance differences full duplex, in according to TIA / EIA-422
32 x RS-422 or RS-485 devices can be connected
TTL: Vio, RXIN, TXOUT, GND support 5V or 3V levels
Work distance: RS-232: 50 foot (15 meters) at 9.6 Kbps

List of packages:
1 x serial connection module
1 x cable
1 x user manual

A notice:
Do not use outside the parameter voltage area.
ProductSiteLaunchDate : 2025-05-23T14:04:02.224Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 43200000
WarrantyDescription : manufacturer warranty for 90 day