Cart 2 india

Specification
AgeRangeDescription : Over 14 years
Brand : RCJTCQX
BulletPoint1 : The 4WS Control Board Line is Compatible with for 1/8 & 1/24 SCX24 1/10 DVC10 1/18 TX4M
BulletPoint2 : Wiring instructions of Race 4WS Control Board Cable: Black CH1, White CH2, Red CH3. For 3Ch transmitters,plug in CH1 and CH3; For 2Ch transmitters, plug in CH1 and CH2.
BulletPoint3 : The controller offers four modes - Front Wheel Steering (with rear servo locked), Rear Wheel Steering (with front servo locked), Four Wheel Steering and (Opposite Direction).The original remote control for TRX4M is not supported. You need to install the CH2 or CH3 channel remote control.
BulletPoint4 : For a 3Ch transmit machine, simply flip the 3rd channel switch to change the mode. For a 2Ch transmit machine, keep the throttle and steering wheel centered then steer left or right three times within 1.5 seconds to cycle to the next mode.
BulletPoint5 : Package Include:2 Sets Four Wheel Steering Control Cable
Color : Black
CpsiaCautionaryStatement : no_warning_applicable
Edition : New
ExternallyAssignedProductIdentifier1 : 0715787240746
ExternallyAssignedProductIdentifier2 : 715787240746
ItemName : 2 Sets Four-Wheel Steering Control Line 4WS Control Board and Servo Control Cable Kit Upgrade Parts for 1/24 SCX24 1/10 DVC10 1/18 TX4M(Black)
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 3 inches
ItemPackageDimensions_Width : 2 inches
ItemTypeKeyword : hobby-rc-vehicle-servo-wiring
Manufacturer : RCJTCQX
ManufacturerMinimumAge : 168
NumberOfBoxes : 1
PartNumber : C 4WS Control Board Line BL
ProductDescription : Description:

【Compatibility】: This Four Wheel Steering Control Cable is designed for 4WS car models including 1/10 DVC10, 1/8, 1/2 SCX24, and 1/18 TX4M. It provides an advanced level of control without the need for expensive transmit machine upgrades.

【Functionality】: The controller offers four modes - Front Wheel Steering (with rear servo locked), Rear Wheel Steering (with front servo locked), Four Wheel Steering and (Opposite Direction). These modes can be easily switched using either a 2Ch or a 3Ch transmit machine.

【Switching Method】: for a 3Ch transmit machine, simply flip the 3rd channel switch to change the mode. for a 2Ch transmit machine, keep the throttle and steering wheel centered then steer left or right three times within 1.5 seconds to cycle to the next mode.

【Wiring Instructions】: The wiring is color-coded for easy installation - Black for CH1, White for CH2 and Red for CH3. for use with a 3Ch transmit machine plug into CH1 and CH3; with a 2Ch transmit machine plug into CH1 and CH2.

【Material & Size】: Made from durability pp material with an overall length of approximately 227mm.

Please note that this product does not support the remote controller for ; A separate remote controller with either a CH2 or CH3 channel is required.

Detailed Size :

Total length:22.7cm/8.94inch
Package Includes:

2 x Four Wheel Steering Control Cable

Note:
Please allow slightly errors 1-2cm differences due to manual measurement.
ProductSiteLaunchDate : 2024-10-10T08:05:55.285Z
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword1 : unisex-children
TargetAudienceKeyword2 : unisex-children
TargetAudienceKeyword3 : unisex-children
UnspscCode : 25170000