Cart 2 india

Specification
AgeRangeDescription : Kid
AspectRatio : 2:1
Brand : SparkFun
BulletPoint1 : ATtiny84 based Continuous Rotation Servo Trigger
BulletPoint2 : Draws 5mA at 5V. Compatible with hobby analog servos.
BulletPoint3 : 5.5V Absolute maximum voltage
BulletPoint4 : Three Control Settings A - sets the position the servo sits in while the switch is open B - sets the position the servo moves to when the switch is closed C - sets the time it takes to get from A to B and back
BulletPoint5 : Easy Control with Potentiometers Configurable Input Polarity Configurable Response Mode
Color : Black
EducationalObjective : Spatial Reasoning
EducationalObjective1 : Exchange
EducationalObjective2 : share
ExternallyAssignedProductIdentifier : 9331632957778
ExternallyAssignedProductIdentifier1 : 717520028901
ExternallyAssignedProductIdentifier2 : 0717520028901
GpsrSafetyAttestation : 1
GraphicsDescription : Dedicated
HardwareInterface : usb
Horsepower : 0.09 horsepower
HumanInterfaceInput : buttons
IncludedComponents : Servo Arm
IndoorOutdoorUsage : outdoor
IsAssemblyRequired : 1
ItemName : SparkFun Servo Trigger - Continuous Rotation
ItemPackageDimensions_Height : 8.9 centimeters
ItemPackageDimensions_Length : 1.3 centimeters
ItemPackageDimensions_Width : 7.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hobby-rc-vehicle-servos
KeyboardLayout : qwerty
Manufacturer : SparkFun
ManufacturerMinimumAge : 1
Material : Engineering Plastic & Aluminum Alloy Case
Material1 : stainless steel
Material2 : aluminum
ModelName : Servo Trigger
ModelNumber : LYSB01GM5Y2Q4-ELECTRNCS
NumberOfItems : 1
NumberOfPlayers : 1
OperatingSystem : ATtiny84 microcontroller (RTOS or Bare-Metal)
OperationMode : Automatic
PackageLevel : unit
PartNumber : WIG-13872
PowerConsumption : 25 milliwatts
PowerSourceType : battery
ProcessorCount : 1
ProductDescription : The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or logic signal changes state, the CR Servo Trigger is able to tell an attached servo motor to move from position A to position B. To use the CR Servo Trigger, you simply connect a hobby servo and a switch, then use the on-board potentiometers to adjust the start/stop positions and the transition time. You can use a hobby servo in your projects without having to do any programming!

When we introduced the original Servo Trigger, we mentioned that it could be reprogrammed to be more useful with continuous rotation servo motors. But reprogramming the firmware is somewhat tedious, and users asked for a Servo Trigger preprogrammed with the continuous rotation logic. With this little board you will be provided an easy way to deploy continuous rotation servos into your projects!

The heart of the CR Servo Trigger is an Atmel ATtiny84 microcontroller, running a small program that implements the servo control features designed for continuous rotation servos. On board each of these CR Servo Triggers you will find three potentiometers: “A” sets the position the servo sits in while the switch is open, “B” sets the position the servo moves to when the switch is closed, and “T” sets the time it takes to get from A to B and back.

Compared with a servo motor, the CR Servo Trigger board draws very little current, roughly 5mA at 5V. Be sure to note that if you’re using the CR Servo Trigger to control your motor, the absolute maximum supply voltage that should be applied is 5.5 VDC. Additionally, the SparkFun CR Servo Trigger is designed to make it easy to daisy chain boards – you can simply connect the VCC and GND pads on adjacent boards to each other.
ProductSiteLaunchDate : 2016-06-05T00:21:19.809Z
Size : 270 degree
SpecificUsesForProduct : programming
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
TargetAudienceKeyword : unisex-children
TargetGender : unisex
Theme : Vehicle
TotalUsbPorts : 1
UnspscCode : 43211500
Voltage : 5 volts