Cart 2 india

Specification
Brand : LULUQUEEN
BulletPoint1 : The rigid Coupling, we provide here, are in the size of: Material: Stainless Steel; Color: Silver; Screws Size: M4*0.7; Bore size: 6mm to 8mm/0.24inch to 0.32inch; Total Size: 22mm x 14mm/0.87inch x 0.55inch(L*D)
BulletPoint2 : The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane.
BulletPoint3 : NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
BulletPoint4 : Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
BulletPoint5 : Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.
Color : Silver
DriveSystem : External Hex
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 732661152766
ExternallyAssignedProductIdentifier2 : 0732661152766
FinishType : Silver
GradeRating : industrial
ItemName : 6mm to 8mm Bore Rigid Coupling Set Joint with Screw Wrench L22XD14 Stainless Steel,Shaft Coupler Connector for 3D Printers, Motor Accessories,2pcs
ItemPackageDimensions_Height : 19.6 centimeters
ItemPackageDimensions_Length : 1.8 centimeters
ItemPackageDimensions_Width : 15.1 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : set-screw-couplings
Manufacturer : LULUQUEEN
Material : Alloy Steel
MaximumShearStrength : High
MeasurementSystem : Metric
MetalType : Carbon Steel
MetalType1 : Stainless Steel
MetalType2 : Alloy Steel
MetalType3 : Copper
ModelNumber : FCoupler-M14-2
NumberOfItems : 2
NumberOfPieces : 2
PartNumber : L03-GX-6-8
ProductDescription :

Specification:

8 pcs screws design

1 pcs Wrench

Thread Size: M4

Color: Silver Tone

Material: Steel

Connection Diameter: 6mm to 8mm

Total Length: 22mm /0.87 inch

Outside Diameter : 14mm/ 0.55 inch

Through Angle: 90 Degree

Package List:

2 Pcs x Rigid Shaft Coupler

8 Pcs x M4 Screws

1 Pcs x M4 Wrench

Description:

Made from Steel material to reduce inertia

Rigid coupling,high torque with rigidity,low inertia and excellent sensitivity

No rotation gap, elastic action can make up for symmetrical angular misalignment

Maintenance-free, oil proof and corrosion resistance

Suitable for model car, model boat, hardware, , mechanical drive situations etc

Note:

Please allow 1-3mm differs due to manual measurement

Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding

ProductSiteLaunchDate : 2023-03-25T13:14:52.024Z
Size : 6mm to 8mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161700