Cart 2 india

Specification
Brand : DMiotech
BulletPoint1 : APPLICATION: Flange coupling connector is mainly installed between the lead screw and the motor shaft, providing the function of shock absorption, and making the transition more stable and smooth. Through this flange coupling connector, the shock caused by the motor movement can be stabilized. Widely used in stepper motors. suitable for model shaft connection, perfect accessories for RC Model motor, etc.
BulletPoint2 : SIZE: Material: Iron Plating;Color: Red;Inner Diameter: 8mm/0.31 inch;Total Height: 13mm/0.51 inch;Cylinder Outer Diameter: 16mm/0.63 inch;Cylinder Height: 10mm/0.39 inch;Base Diameter: 32mm/1.26 inch;Base Height: 2mm/0.08 inch;Screw Holding Degree: 90
BulletPoint3 : FEATURE: Rigid Flange Coupling is made of Aluminum alloy, hardened by heat treatment, and then electroplated. Durable insulation, not easy to deform under pressure, makes your shaft more stable, longer service life, easy to install and replace.
BulletPoint4 : FUNCTION: Flange Shaft Coupling can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.the machine is not easy to separate during operation.
BulletPoint5 : NOTE: Please confirm the size of your stepper motor shaft before purchasing
Color : Red
DriveSystem : External Hex
ExteriorFinish : Steel
FinishType : Silver
GpsrSafetyAttestation : 1
GradeRating : Industrial
ItemName : DMiotech 2 Pack 8mm Inner Dia H13xD10 Flange Coupling Connector Rigid Guide Shaft Support Coupler Shaft Coupling with Screws for DIY RC Model Motors Red
ItemPackageDimensions_Height : 9.2 centimeters
ItemPackageDimensions_Length : 1.4 centimeters
ItemPackageDimensions_Width : 6.2 centimeters
ItemTypeKeyword : set-screw-couplings
Manufacturer : DMiotech
Material : Steel
Material1 : Aluminum
Material2 : Iron
MeasurementSystem1 : Metric
MeasurementSystem2 : Inch
MetalType : Aluminum
ModelNumber : mif220914me0710
PartNumber : mif220914me0710
ProductDescription : APPLICATION: Flange coupling connector is mainly installed between the lead screw and the motor shaft, providing the function of shock absorption, and making the transition more stable and smooth. Through this flange coupling connector, the shock caused by the motor movement can be stabilized. Widely used in stepper motors. suitable for model shaft connection, perfect accessories for RC Model motor, etc.

ADVANTAGES:
1. Rigid Flange Coupling is made of Aluminum alloy, hardened by heat treatment, and then electroplated. Durable insulation, not easy to deform under pressure, makes your shaft more stable, longer service life, easy to install and replace.
2. Flange Shaft Coupling can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.the machine is not easy to separate during operation.

PACKAGE CONTENT:
Material: Iron Plating
Color: Red
Inner Diameter: 8mm/0.31 inch
Total Height: 13mm/0.51 inch
Cylinder Outer Diameter: 16mm/0.63 inch
Cylinder Height: 10mm
Base Diameter: 32mm/1.26 inch
Base Height: 3mm/0.12 inch
Screw Holding Degree: 90
Package Including:2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here )

NOTE: Please confirm the size of your stepper motor shaft before purchasing


ProductSiteLaunchDate : 2022-10-29T10:10:42.313Z
Size : Red
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161500