Cart 2 india

Specification
Brand : PATIKIL
BulletPoint : Price For: Each Type: Bronze Modified Shaft Dia. (In.): 5/8 Item: Coupling Rollers: - Shaft Type: Double Flat/Slot Section Description: - Country of Origin (subject to change): China
BulletPoint1 : The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
BulletPoint2 : The rigid Coupling, we provide here, are in the size of: Material: Stainless Steel; Color: Silver; Screws Size: M4*0.7; Bore size: 10mm to 10mm/0.39inch to 0.39inch; Total Size: 22mm x 16mm/0.87inch x 0.63inch(L*D)
BulletPoint3 : Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
BulletPoint4 : Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
BulletPoint5 : Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
Color : Silver Tone
DriveSystem : External Hex
ExteriorFinish : Brass,Stainless Steel
ExternallyAssignedProductIdentifier : 7436829138038
ExternallyAssignedProductIdentifier1 : 0850009847218
ExternallyAssignedProductIdentifier2 : 850009847218
FinishType : Brass,Silver
GpsrSafetyAttestation : 1
GradeRating : High Quality
ItemName : PATIKIL Shaft Coupler Connector L22 x D16 10mm to 10mm Bore Rigid Coupling Stainless Steel Shaft Joint w Screw,Wrench for 3D Printers Silver 2Pack
ItemPackageDimensions_Height : 8.9916 centimeters
ItemPackageDimensions_Length : 1.905 centimeters
ItemPackageDimensions_Width : 5.9944 centimeters
ItemPackageQuantity : 2
ItemShape : Coupling
ItemTypeKeyword : set-screw-couplings
Manufacturer : PATIKIL
Material : Aluminum
Material1 : Stainless Steel
Material2 : Brass
MeasurementSystem1 : Metric
MeasurementSystem2 : Inch
MetalType : Aluminum
MetalType1 : Stainless Steel
MetalType2 : Brass
ModelNumber : a18121800ux0629
NumberOfBoxes : 1
NumberOfItems : 2
NumberOfPieces : 2
PartNumber : pta221024tt0277
ProductDescription : What is this?
Shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane

What will I get?
Rigid Coupling, we provide here, are in the size of:
Material: Stainless Steel
Color: Silver
Screws Size: M4*0.7
Bore size: 10mm to 10mm/0.39inch to 0.39inch
Total Size: 22mm x 16mm/0.87inch x 0.63inch(L*D)
Package Content: 2Pack x shaft coupler

Is there any advantages of the product?
1. Shaft Coupler made of Stainless Steel material, durable, corrosion-resistant, and does not rust, can be used for a long time
2. Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.
3.No rotation gap and elastic action can make up for symmetrical angular misalignment.

How to use it?
Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.

What should I notice?
All size above is measured by manual, please allow +/-0.1 inch error.
ProductSiteLaunchDate : 2022-12-25T07:05:39.132Z
Size : 10mm to 10mm
StreetDate : 2017-05-15T00:00:01Z
Style : Chair Cylinder Removal Tool
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500