Cart 2 india

Specification
Brand : SKF
BulletPoint : Made in United States
BulletPoint1 : The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
BulletPoint2 : The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
BulletPoint3 : "SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. "
BulletPoint4 : "Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool. "
BulletPoint5 : While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
BulletPoint6 : Surface treatment: primary color bright surface polishing
Color : One Color
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier : 8498202551659
ExternallyAssignedProductIdentifier1 : 085311041485
ExternallyAssignedProductIdentifier2 : 0085311041485
ExternallyAssignedProductIdentifier3 : 00085311041485
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : Speedi Sleeve Kit
ItemName : SKF 99167 Speedi Sleeve and Tool Kit, Inch, 1.688in Shaft Diameter, 0.313in Width
ItemPackageDimensions_Height : 4.318 centimeters
ItemPackageDimensions_Length : 10.922 centimeters
ItemPackageDimensions_Width : 11.176 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : shaft-hub-locking-devices
Manufacturer : SKF USA
Material : Stainless Steel
ModelName : Speedi Sleeve Kit
ModelNumber : 99167
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 99167
PartTypeId : 7584
ProductDescription : This kit includes all the parts you need to build a poly bushing joint with a 2 inch mounting width and a 1/2 inch bolt hole. This combo is great for any application that you need to isolate vibrations. These can be used for motor mounts, cage mounts, transmission and transfer case cross members and many other applications.
ProductSiteLaunchDate : 2010-10-05T17:25:23.348Z
Size : 12.7mm x M6 (2pcs)
Style : SSLEEVE
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25170000