Cart 2 india

Specification
Brand : SKF
BulletPoint1 : The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
BulletPoint2 : The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
BulletPoint3 : "SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. "
BulletPoint4 : "Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool. "
BulletPoint5 : While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
BulletPoint6 : Removable Flange Outside Diameter: The outside diameter of the removable flange is 8.375 inches
Color : Silver
ExteriorFinish : Painted
ExternallyAssignedProductIdentifier1 : 085311042802
ExternallyAssignedProductIdentifier2 : 0085311042802
ExternallyAssignedProductIdentifier3 : 00085311042802
FinishType : Silver
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : Speedi Sleeve
ItemName : SKF 99423 Speedi Sleeve, Inch, 4.234in Shaft Diameter, 0.781in Width
ItemPackageDimensions_Height : 6.604 centimeters
ItemPackageDimensions_Length : 16.51 centimeters
ItemPackageDimensions_Width : 15.748 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : shaft-hub-locking-devices
Manufacturer : SKF USA
Material : Nickel-coated Iron
MaxInputSheetCapacity : 20
MeasurementSystem1 : Metric
MeasurementSystem2 : Inch
MetalType1 : Nickel
MetalType2 : Iron
ModelName : Speedi Sleeve
ModelNumber : 99423
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 2
PackageLevel : unit
PartNumber : 99423
PartTypeId : 7584
ProductDescription : The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed. The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes. While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve.
ProductSiteLaunchDate : 2010-11-02T20:14:36.225Z
Size : 10 to 10mm L35XD16 2pcs
Style : SSLEEVE
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25170000