Cart 2 india

Specification
BikeType : City Bike
Brand : SKF
BulletPoint : CUSTOM IDENTIFIER: SQUARE D B-125 D647651
BulletPoint1 : The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
BulletPoint2 : The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
BulletPoint3 : "SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface. "
BulletPoint4 : "Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool. "
BulletPoint5 : While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
ExteriorFinish : Painted
ExternallyAssignedProductIdentifier1 : 085311043199
ExternallyAssignedProductIdentifier2 : 0085311043199
ExternallyAssignedProductIdentifier3 : 00085311043199
FitType : Vehicle Specific
IncludedComponents : Speedi Sleeve
ItemName : SKF 99605 Speedi Sleeve, Inch, 6.063in Shaft Diameter, 1.024in Width
ItemPackageDimensions_Height : 6.604 centimeters
ItemPackageDimensions_Length : 23.368 centimeters
ItemPackageDimensions_Width : 23.114 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : shaft-hub-locking-devices
Manufacturer : SKF USA
Material : Alloy Steel
Material1 : Rubber
Material2 : Ethylene Propylene Diene Monomer (EPDM)
ModelName : Speedi Sleeve
ModelNumber : 99605
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 99605
ProductDescription : The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It’s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed. The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472” to 8” (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011” (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 µin (0,25 to 0,5 µm). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes. While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve.
ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2010-11-02T20:15:46.951Z
Size : One Size
Style : SSLEEVE
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1