Cart 2 india

Specification
Brand : Fastenere
BulletPoint1 : Stainless steel phillips pan head sheet metal screws will have no problem punching through a thin or light guage sheet metal but will require a pilot hole for a thicker guage metal; the phillips drive has a tendency to slip if there is too much torque applied during installation and these machine screws being made of a high quality stainless steel which is softer than other non corrosion resistant fasteners are also susceptible to stripping
BulletPoint10 : [Spacing between Anchors] Each anchor must be spaced a Minimum Distance of 4" from each other Anchor when measured center to center. [Edge Distance] FOR 1/4" - Each anchor Cannot be installed any closer than 3" from an unsupported edge of the concrete. [Maximum Fixture Thickness] The Maximum Fixture Thickness or the Maximum Thickness of the Material being Fastened for a anchor is .25" to .75". This will ensure that the Minimum Embedment of 1" will be met
BulletPoint2 : Phillips pan head sheet metal screws with a self tapping thread patern that forms its own threads in the material it is being screwed into and is mainly used for attatching two pieces of metal together but also works great in wood and plexiglass because of the coarse thread
BulletPoint3 : Pan heads have a domed top with a flat load bearing surface on the underside that will hold materials being fastened firmly together
BulletPoint4 : Made from stainless steel grade 18-8 which offers a high level of chemical and corrosion resistance that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance; 18-8 stainless steel pan head sheet metal screws are a better choice than 410 self drilling screws in out door applications
BulletPoint5 : Fastenere brand stainless steel sheet metal screws offer the corrosion resistance and strength that makes them the best choice for an application that is exposed to a wet or damp enviroment and will withstand the test of time
BulletPoint6 : [MATERIAL] Manufactured from Heat-Treated 1022A High Strength Carbon Steel for Strength and Durability
BulletPoint7 : [SERVICE] 100% Customer Satisfaction and Money Back Guarantee & Responsive Customer Support for Returns. Please visit our website for further technical information and to learn about the FixMaster offering https://www.myfixmaster.com/
BulletPoint8 : The Head style is Countersunk Phillips Flat - This will allow the fastener head to lay flush in the base material. The Diameter is 1/4", The Overall Length is 1.75", The Thread Length is 1.17", The Total number of Threads is 8. [Setting Driver Required & included with each box of Anchors] FOR 1/4" - a 5/16" nut driver is required for driving the anchor into the base material. FOR 1/4" - Each Tapcon style Blue Screw requires a 3/16" hole to be drilled in the base material being used (Concrete, Block, Brick & Wood). The hole should be drilled with the carbide tipped bit that is included in each box of anchors.
BulletPoint9 : [Minimum Embedment] The Minimum Anchor embedment into the Base Material is 1". This means the Anchor must be installed so that a minimum of 1" of the anchor is embedded into the Base Material. [Fixture Hole Diameter] FOR 1/4" - The hole in the Fixture or Base Material being Fastened must be Larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".
Color : One Color
DriveSystem : Phillips
ExteriorFinish : Bright Finish
ExternallyAssignedProductIdentifier : 1160014403309
GradeRating : Premium
ItemName : #10 x 4 Pan Head Sheet Metal Screws, Stainless Steel 18-8, Full Thread, Bright Finish, Self-Tapping, Quantity 25 by Fastenere
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sheet-metal-screws
Manufacturer : Fastenere
Material : Stainless Steel
MeasurementSystem : Imperial
MetalType : Stainless Steel
ModelName : LIUDONGX
ModelNumber : Sheet Metal Screws
NumberOfItems : 25
NumberOfPieces : 25
PartNumber : 4048687
ProductDescription : Sheet metal screws have sharp threads that cut into a material such as sheet metal, plastic or wood. They also make excellent fasteners for attaching metal hardware to wood because the fully threaded shank provides good retention in wood.General Product Information

• Head Style : Pan
• Drive Style : Phillips
• Drive Size : #2
• Thread : #10
• Length : 4"
• Quantity of Fasteners in Package : 25

Detailed Product Information:

• Head Diameter : 0.373"
• Head Height : 0.133"
• Thread Diameter : 0.190"
• Thread Coverage : Full Thread
• Thread Length : 4"

ProductSiteLaunchDate : 2018-09-04T10:08:59.970Z
Size : 4 inches
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31161500