Cart 2 india

Specification
Brand : Robosource
BulletPoint1 : [Many Applications] – Solid color makes for great outdoor signs, shop signs, home decor painting, painting templates, film, video, photo, stage, theater, gifts, DIY projects and more! Can be cut and shaped for any project.
BulletPoint2 : [Cast Acrylic = Great Results] - Cast acrylic sheets produce higher quality results than typical extruded acrylic sheets. Clean cuts without burr formation when laser cut/laser engraved. Better scratch resistance than standard extrusion acrylic. Solid, vibrant and consistent coloring
BulletPoint3 : [Adaptable Material] – Easy to cut, engrave or thermoform. Also known as Plexiglass or Plastic Plexi. Simple to cut with a jigsaw, table saw, drill, router. Great for laser cutting and compatible with various laser cutters/engravers like Glowforge, XTool, Ten-High, Reci, Genmitsu, Sculpfun, Neje.
BulletPoint4 : [Accurate Dimensions] - 12x12" +/- 1/8. at 0.118" thick. Robosource sells various colors like Orange, Red, Yellow, Blue, Green, White, Black and Clear. (1 foot x 1foot) (30cm x 30cm) (300mm x 300mm)
BulletPoint5 : [Best Mask] - Paper mask is better for saws and laser cutting. It leaves cleaner cuts without melting and the paper is easy to peel off afterwards. The paper mask also makes it easy to mark measurements and templates.
Color : Yellow
ExternallyAssignedProductIdentifier1 : 0723503587198
ExternallyAssignedProductIdentifier2 : 00810120763798
ExternallyAssignedProductIdentifier3 : 723503587198
ItemForm : Sheet
ItemName : Acrylic Plastic Sheet, Cast Acrylic for Laser Cutting/Engraving, Solid Vibrant Color, 12" X 12" X 0.118" (1/8"), Plastic Sheet, Paper Film, Easy to Cut/Etch, DIY/Hobby, for Laser. (12x12, Yellow, 1)
ItemPackageDimensions_Height : 30.5054 centimeters
ItemPackageDimensions_Length : 1.0922 centimeters
ItemPackageDimensions_Width : 30.4038 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : plastic-sheets
Manufacturer : Robosource
Material : Acryllic
ModelNumber : ACR0118x12x12_CP_YEL
NumberOfItems : 1
PartNumber : ACR0118x12x12_CP_YEL
ProductDescription : Cast acrylic is better for laser cutting compared to typical extruded acrylic.
The cast results in cleaner cuts and finishes, and the paper masking is smooth to come off after laser cutting.
Acrylic has clear advantages over PET & PVC including higher strength and resistance to heat, cold, and UV.
Before starting your DIY project, here are some tips to keep in mind:
1. Measure and mark the sheet before cutting and peeling
2. Cut the plastic either with a saw that has a suitable blade for plastics or laser cutter
3. Peel the cut sheets afterwards
4. Keep the protective paper film on until ready for use to prevent scratches.
Note: If you stack the sheets without the mask, the materials rubbing against each other can scratch each other.
5. If desired, cut edges can be sanded and polished with a buffing wheel.
ProductSiteLaunchDate : 2022-11-30T15:49:05.929Z
Size : 12x12
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 30265802