Cart 2 india

Specification
Brand : Forged Acrylics
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 : ⬛️ 3x3 Inch Nominal - Actual size: 2-7/8 x 2-7/8“ after saw cutting kerf
Color : Multi
ExternallyAssignedProductIdentifier : 5060926860251
ExternallyAssignedProductIdentifier1 : 0691036172962
ExternallyAssignedProductIdentifier2 : 691036172962
GradeRating : Residential
ItemForm : Sheet
ItemName : Forged Acrylics 1/8" Cast Acrylic Sheet Variety Pack, 3 x 3 Inch Nominal (7 Sheets of .118")
ItemPackageDimensions_Height : 11.8 centimeters
ItemPackageDimensions_Length : 2.9 centimeters
ItemPackageDimensions_Width : 10.7 centimeters
ItemPackageQuantity : 1
ItemShape : Sheet
ItemTypeKeyword : plastic-sheets
Manufacturer : Forged Acrylics
Material : Acryllic
Material1 : Polycarbonate
Material10 : Tinted Gray Acrylic Sheet Replacement
Material2 : polycarbonate
Material3 : plastic
Material4 : Plastic Sheet
Material5 : Smoke Grey Plastic
Material6 : Plexiglass Replacement
Material7 : Glass Replacement
Material8 : Smoke Gray PC Sheet
Material9 : Tinted Grey Plastic Sheets
ModelNumber : LSR-VAR-3IN-V1
NumberOfItems : 7
PartNumber : LSR-VAR-3IN-V1
ProductDescription : Why Cast Acrylic?
Cast Acrylic, commonly referred to as Plexiglass, is perfect for laser cutting! The small 3x3” nominal sizing makes it flexible and easy to use for those with smaller desktop lasers like the Glowforge, Dremel, or FSL Muse. Cast acrylic is a versatile plastic that will cut, drill and rout cleaner than extruded acrylic.

Cast acrylic sheets come covered with paper masking on both sides to protect the plastic from scuffs or scratches during cutting or transit.

How is Cast Acrylic Different from Extruded Acrylic?
Cast acrylic has a higher molecular weight, therefore it will cut, drill and rout cleaner. When machining cast acrylic, shavings will flake off whereas extruded acrylic shavings may gum up on the tool. Cast acrylic also offers better glue-joint effectiveness and performs better in laser cutting.

Continuous Service Temp: 180° F (Cast) vs. 160° F (Extruded)
Formability Temp: 340° F to 380° F (Cast) vs 290° F to 320° F (Extruded)

Sizing
Sheets use nominal sizing and are approximately 2-7/8"x2-7/8" to account for the ⅛” saw cutting kerf. Thickness is 0.118", all acrylic has a thickness tolerance. Actual thickness is typically between 0.115" - 0.136".

Transparency Guide
Translucent = Light & Shadows can be seen through Sheet.
Transparent = Images can be viewed through sheet (like tinted glass)
Opaque = Neither light nor images can be seen through the sheet

ProductSiteLaunchDate : 2021-05-29T04:52:12.395Z
Size : 3
SpecificationMet : Plastic Sheet Polycarbonate Sheet Gray Polycarb Panel Replaces Plexiglass Glass Acrylic Sheets Pc
Style : 3 Inch Pack
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 7
UnspscCode : 30265802