Cart 2 india

Specification
Brand : Trallyer
BulletPoint1 : 1.Full body metal created,Strong and durable.
BulletPoint2 : 2.The mold parts on the product can be adjusted to fit multiple size of staple lacing , It Can be applied with model:RS62, RS125, RS187, MR1S MR2S MR3S.
BulletPoint3 : 3. It weighs 4.5 pounds,size:4x3x4 inches.
BulletPoint4 : 4. Lace 4 inch of belt width at a time ,move machine across lace to install full belt width.
BulletPoint5 : 5.It holds fasteners securely and staple in proper alignment.
BulletPoint6 : Note: Please read the product instructions and nameplate carefully before use, especially the Safety Precautions section. Make sure the switch is in the OFF position before turning on the unit. The air filter sponge should be replaced every 36 hours of operation. The filter needs to be thoroughly cleaned after 8 hours of operation. It is strictly prohibited to disassemble the filter screen during operation. The carburetor must be thoroughly cleaned before use after every 100 hours of operation.
Color : Red and Black
DrillType : hammer_drill
ExternallyAssignedProductIdentifier : 9338855373125
IncludedComponents : staple fastner tool
IncludedComponents1 : 1 x Jack Hammer
IncludedComponents2 : 1 x Pointed Pickaxe
IncludedComponents3 : 1 x Flat Pickaxe
IncludedComponents4 : 1 Set Tools
IncludedComponents5 : 1 x Funnel
ItemName : Conveyor belt 4" staple fastener installation tool for model RS62 RS125 RS187 MR1S MR2S MR3S staple lacing,full body metal staple fastener tool set TRALLYER
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTorque : 3.5 newton_meters
ItemTypeKeyword : hand-tool-sets
LockType : Pawl
Manufacturer : ChengDu MengAo Technology Co.,Ltd
Material : Steel
MaximumPower : 1900 watts
MaximumRotationalSpeed : 6500 rpm
MeasurementAccuracy : 0.01
ModelName : MINIRD-100S
ModelNumber : MINIRD-100S
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : JZON6A-000100
PowerSourceType : hand_powered
ProductDescription : 1.Full body metal created,Strong and durable. 2.The mold parts on the product can be adjusted to fit multiple size of staple lacing , It Can be applied with model:RS62, RS125, RS187,MR1S MR2S MR3S . 3. It weighs 4.5 pounds,size:4x3x4 inches. 4. Lace 4 inch of belt width at a time ,move machine across lace to install full belt width. 5.It holds fasteners securely and staple in proper alignment.
ProductSiteLaunchDate : 2024-04-02T08:47:14.358Z
RegulatoryComplianceCertification : NSHSS.0525GC-012
Size : 15.74 * 10.62 * 37.4in
Speed : 6500 rpm
Style : Height 37.4(w/ Drill 12.2")
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Wattage : 1900 watts