Cart 2 india

Specification
Brand : paock
BulletPoint1 : Total length: 9.8 inches (250 mm)
BulletPoint2 : Compatible Bit Size: Opposite Side 0.26 inch (6.5 mm) Type
BulletPoint3 : Specifications: 2-prong chuck with ratchet mechanism
BulletPoint4 : Tungsten Carbide Tool: Long-lasting bits are made from tungsten carbide for precise and easy experience. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, can ensure high work efficiency.
BulletPoint5 : Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed.
BulletPoint6 : Made in the USA
Color : Silver
CustomerPackageType : Standard Packaging
CuttingAngleString : 118 degrees
DriveSystem : Square
ExternallyAssignedProductIdentifier : 4975846490727
ExternallyAssignedProductIdentifier1 : 5032759048298
ExternallyAssignedProductIdentifier2 : 05032759048298
ExternallyAssignedProductIdentifier3 : 00662355699010
FinishType : Uncoated
GpsrSafetyAttestation : 1
IncludedComponents : No
ItemLength : 6 inches
ItemName : PAOCK SSPOWER NB-202A Rapid Hand Drill
ItemPackageDimensions_Height : 32.9 centimeters
ItemPackageDimensions_Length : 7.1 centimeters
ItemPackageDimensions_Width : 16.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : short-length-drill-bits
Manufacturer : パオック(PAOCK)
Material : Steel
MeasurementSystem : Inch
MfgSeriesNumber : 157
ModelName : 70956
ModelNumber : NB-202A
NumberOfBoxes : 1
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 10
PackageLevel : unit
PartNumber : NB-202A
PowerSourceType : Manual
ProductDescription : Specifications:
Cutting Edge Diameter: 0.8mm / 0.031"
Cutting Edge Length: 10mm / 0.39"
Shank Diameter: 3.175mm / 1/8"
Overall Length: 38mm / 1-1/2"
Material: Tungsten Carbide
Hardness: 45HRC
Package Included: 1 Set (10pcs) x PCB Drill Bits, 1pcs x Plastic Box

Descriptions:Long-lasting bits are made from tungsten carbide for precise and easy experience. Features high hardness, good toughness, wear resistance, high strength, resistance to bending and heat resistance. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, can ensure high work efficiency.
Suitable for drilling and engraving PCB, acrylic, plastics, fiberglass, wood, aluminium, soft metals. Used on PCB drilling machines, engraving machine, CNC lathes, machining center. The mini drill bits is easily twisted off. Use vertically and take good control of your CNC speed.
Sharp cutting edge provides smooth cutting, reduces cutting force, prevents drill broken, and improves the drilling accuracy. Spiral chip space design for fast and clean chip removal. The tool set can work quickly and cleanly, no glitches or scrap left. The positioning rings reduce machine adjustment time and increase efficiency.
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.

ProductSiteLaunchDate : 2013-12-06T02:41:15.428Z
Size : 0.8mm
StreetDate : 2012-06-26T00:00:01Z
Style : NB-202A
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Wood,Acrylic,Fiberglass,Metals
SurfaceRecommendation1 : Metal
SurfaceRecommendation2 : Concrete
SurfaceRecommendation3 : Masonry
UnitCount : 1
UnspscCode : 27112700