Cart 2 india

Specification
Brand : Trusco
BulletPoint1 : This is a product for business contractors
BulletPoint2 : Can be used for a wide range of drilling, from soft to hard wood
BulletPoint3 : Heat resistant up to 250 degrees
BulletPoint4 : Processing Material: Wood
BulletPoint5 : Tips: Used on machining centers, CNC lathes, CNC engraving and milling machine. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
Color : Grey
CuttingAngleString : 118.0 degrees
ExternallyAssignedProductIdentifier : 4550414221974
ExternallyAssignedProductIdentifier1 : 0619832542079
ExternallyAssignedProductIdentifier2 : 619832542079
FinishType : Chrome
GpsrSafetyAttestation : 1
IncludedComponents : No
ItemName : Trusco Nakayama TMDBS3 Short Drill Bit for Carpentry 0.1 inch (3 mm) Straight Shank
ItemPackageDimensions_Height : 12.9 centimeters
ItemPackageDimensions_Length : 0.9 centimeters
ItemPackageDimensions_Width : 3.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : short-length-drill-bits
Manufacturer : トラスコ中山
Material : Alloy Steel
Material1 : Stainless Steel
Material2 : Carbide
Material3 : Carbon Steel
Material4 : High Speed Steel
Material5 : Alloy Steel
ModelName : CLAS
ModelNumber : a22032700ux0235
NumberOfItems : 1
PackageLevel : unit
PartNumber : TMDBS3
ProductDescription : Specification:
Cutting Edge Diameter: 2.7mm / 0.106"
Shank Diameter: 4mm / 0.16"
Cutting Edge Length: 10mm / 0.39"
Overall Length: 50mm / 2"
Material: Tungsten Carbide
Finish: Titanium Coated (Nanometer Coating)
Cutting Hardness (Max.): HRC60
Point Angle: 118 Degree
Package Content: 2pcs x Twist Drill Bit


Description:Made of super fine grain carbide, it has high hardness (HRC92), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.
Suitable for drilling materials below HRC60, such as stainless steel, alloy steel, tool steel, carbon steel, etc.. Titanium nanometer coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction.
Large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
Used on machining centers, CNC lathes, CNC engraving and milling machine. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
Tips: Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.

ProductSiteLaunchDate : 2022-10-04T18:04:24.131Z
Size : 3mm
Style : Casual
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Stainless Steel,Alloy Steel
UnitCount : 1
UnspscCode : 27111700