Cart 2 india

Specification
Brand : DYTDIEYINGTU
BulletPoint1 : Line length 2.3ft/70cm, suitable for long distance off-plane control shooting on the stabilizer. For example, the DJI Focus Pro handle is connected to the tripod to record the operation video
BulletPoint2 : This cable only has one function, plug into the EXT port on the camera, press the red button on the stabilizer to REC video on Start/end.
BulletPoint3 : Plug with push-pull self-locking function, when inserting the camera should be aligned with the red dot card position, do not pull hard when pulling out, gently push the bottom The lock position can be easily removed.
BulletPoint4 : USB C is controlled by plugging into the "RSS" camera control port on the stabilizer.
BulletPoint5 : Wire length can be selected, this product has 12 inches, 59 inches, 196 inches three.
ButtonQuantity : 2
CompatibleDevices : Camera
CompatibleDevices1 : Camera
CompatibleDevices2 : Camcorder
ConnectivityTechnology : Connecting
ConnectorGender : Male-to-Female
ConnectorType : USB Type C
ControllerType : Button Control
ExternallyAssignedProductIdentifier1 : 0707918628400
ExternallyAssignedProductIdentifier2 : 707918628400
IncludedComponents : RSS-KOMODO 9PIN cable *1pcs
IndoorOutdoorUsage : outdoor
ItemName : DJI Komodo Video Cable - 70cm/2.3ft, 9pin EXT Release, Compatible with Komodo X, V-RAPTOR, Ronin-Focus Pro
ItemPackageDimensions_Height : 0.8 inches
ItemPackageDimensions_Length : 4.7 inches
ItemPackageDimensions_Width : 3.5 inches
ItemPackageQuantity : 1
ItemTypeKeyword : camera-shutter-release-cords
Manufacturer : DYTDIEYINGTU
MaximumRange : 5 meters
ModelName : RC-301 S2
ModelNumber : RSS-KMD 9
NumberOfItems : 1
NumberOfPins : 33
PartNumber : 1
ProductDescription :

• USB C to 9pin EXT cable(70cm/27.5in) 
• Port specifications: type-c 24pin to 9pin FGG plug 
• 1) support stabilizer: for DJI Ronin - sc/rsc2 / rs2 / rs3 / rs4, Focus Pro
•  2) Support cameras:for Komodo,/Komodo X/V-RAPTOR 
• 3) Support control function: video recording 
• 4) After plugging in the RSS jack on the DJI stabilizer, the display will pop up "Shutter cable is connected", if it does not show, please plug in the stabilizer end again. Only the "RSS" camera control port on the DJI stabilizer can be inserted, and other TYPE-C ports have different functions and cannot be used universally. 
• 5) Plug with push-pull self-locking function, when inserting the camera to align with the red dot card position, do not pull hard when pulling out, gently push the bottom lock position can be easily pulled out. 6) Line length 70cm/27.5 inches, weight 30g. Wire diameter 3.0mm pvc material
• Plug assembly material parameters: 
• 01: Plug housing -GB3604 brass chrome plated 
• 02: Elastic lock sleeve -GB3604 brass nickel plated 
• 03: Insulator -PPS 
• 04: Pin/core -GB3602 copper gold plated
• 05: Plug nut -GB3604 brass chrome plated
  

ProductSiteLaunchDate : 2024-10-10T13:41:34.738Z
RecommendedUsesForProduct : Connecting DJI Komodo cameras to DJI stabilizers for video recording and control
Size : RSS-9pin komodo
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SupportedDevicesQuantity : 1
UnspscCode : 45121600
WarrantyDescription : 1