Cart 2 india

Specification
BatteriesRequired : 1
Brand : DYTDIEYINGTU
BulletPoint1 : Since the DJI Ronin-S is a new generation product, please visit the DJI official website to update the latest firmware version, in order to better compatible with your camera
BulletPoint2 : In order to better operating experience, the Settings of each brand of camera are listed, please check carefully
BulletPoint3 : The port of DJI's Ruying S stabilizer is on the left side of the express board, and the jack with RSS words is silkscreen printed
BulletPoint4 : After plugging in the cable, power on the stabilizer first, then turn on the camera to communicate
BulletPoint5 : If there is no response, turn off the camera power and turn it on again。The line length is extended to 35mm/13.8in, and the camera can be upright for portrait shooting
BulletPoint6 : For cameras released after 2022 to be compatible with the DJI S stabilizer, it is necessary to update the latest software of the DJI stabilizer
ButtonQuantity : 1
Color : Black
CompatibleDevices : dji ronin-s stabilizer
ConnectivityTechnology : Infrared
ConnectorGender : Male-to-Female
ConnectorType : 8 Pin EPS
ControllerType : Button Control
ExternallyAssignedProductIdentifier : 6941586600441
ExternallyAssignedProductIdentifier1 : 719527094040
ExternallyAssignedProductIdentifier2 : 0719527094040
ExternallyAssignedProductIdentifier3 : 00847372007660
ExternallyAssignedProductIdentifier4 : 05051749318494
ExternallyAssignedProductIdentifier5 : 00050332131439
GpsrSafetyAttestation : 1
IncludedComponents : MCC Cable 1pcs
IndoorOutdoorUsage : indoor
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : DYTDIEYINGTU for DJI Ronin-s R-Wire Camera Control Connection Cable MCC-c stabilizer Data Shutter Release Extension Cable A7M3 A7R4 A7M4 Z6 Z7 Z7II GH5 GH5S (MCC-C)
ItemPackageDimensions_Height : 12.2936 centimeters
ItemPackageDimensions_Length : 0.9906 centimeters
ItemPackageDimensions_Width : 7.6962 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : camera-shutter-release-cords
Manufacturer : dongguan dieyingtu
MaximumRange : 10 meters
ModelName : MCC
ModelNumber : MCC-C
ModelYear : 2007
NumberOfItems : 1
NumberOfPins : 3
PartNumber : MCC
ProductDescription : MCC-C camera control cable Applicable stabilizer: DJI Ronin-S

• Support control functions: take photos, start/stop recording, trigger autofocus, electronically controlled follow focus 
• Camera brand models that support control: 
• A) for SONY: A7C A7R3, A7R4, A7M3, A9II, A7R5 (Not photo) 
• Precautions for using SONY Camera Settings " Using the Camera Control Cable (MCC-C) :
• 1. The camera focus mode must be set to Manual Focus (MF). 
• 2. Turn off the Control with Smartphone function on the camera. The setting method is as follows: Select Menu Network Use Smartphone Control Select Disable. 
• 3. Set the USB Connection function of the camera to Computer Remote Control. The specific setting method is as follows: Network menu "Computer remote control function" Computer remote control "open. 
• 4. The 5-axis anti-shake function of the camera body will be automatically turned off. When matched with the anti-shake function of the lens, the anti-shake function is not affected after the lens anti-shake function is turned on. 
• 5. When using the electronic focus function, if the lens has two modes of AF and MF, please set it to AF mode, otherwise the electronic focus function cannot be used.
  
• B  )for canon: EOS R,EOS RP,R5 ,R6,1DX3,G7X3)
• < Canon camera use Settings note > 
• 1. Due to the camera system, if you need to take pictures, please switch the camera shooting mode to take pictures; If you want to record, switch the camera mode to video. 
• 2. Due to differences in lens control logic, when using electronically controlled focus, the lens needs to select AF (autofocus) gear, and the body needs to turn off the AF Servo function.
• C) for nikon:d780,z6,z6ii,z7,z7ii 
• Note: Turn on the camera real-time view function, switch the lens focus mode to A, and set the internal focus mode to AF-S/AF-C to use the electronic control and focus power
  
• D )for panas:GH5,GH5S,S1,,S1H,S5,
  
•  Matsushita camera use Settings note > 
• 1. Set the USB mode of the camera to PC (Tether) mode or select PC (Tether) mode in the displayed dialog box when the camera is powered on. 
• 2. Switch the focus mode switch on the camera body to MF (manual focus), you can use the electronically controlled focus function 
• 3. Switch the focus mode switch on the camera body to AFS/AFF/AFC, and you can trigger the automatic focus of the camera through the camera control button on the PTZ.
  
• E  )for Fujifilm: X-T3,X-T4
  
• fuji Setting precautions 
• 1. Set PC Connection Mode of the camera to USB Auto Mode. The specific setting method is as follows: Select menu → Settings → Connection Settings →PC connection mode →USB auto mode. 
• 2. The button function of the camera body is not supported during connection. If you need to use the button function of the camera body, disconnect the camera control cable or set the head to sleep. To switch between recording mode and photographing mode of the camera, restart the camera or set the PTZ to sleep mode
  

ProductSiteLaunchDate : 2024-09-05T02:48:42.216Z
RecommendedUsesForProduct : Camera Control for DJI Ronin-s Stabilizer
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SupportedDevicesQuantity : 1
UnspscCode : 45121600