Cart 2 india

Specification
Brand : DYTDIEYINGTU
BulletPoint1 : This camera control cable is used to connect your camera to the Camera Control Port of DJI for camera control. To control the camera's video recording and photo functions, as well as to trigger the autofocus function
BulletPoint2 : Customers, please note: This cable only serves the shutter release function (focusing, taking photos, and recording videos) and does not support adjusting ISO/ shutter speed/zoom functions on the stabilizer
BulletPoint3 : The 3.5mm plug should be rotated and pressed to the bottom to ensure normal communication (as it is relatively tight, some force is needed)
BulletPoint4 : Applicable to DJI Brand Stabilizer Model: Ronin-sc,Ronin-sc2,Ronin-RS2,Ronin-RS3,RS3 MINI,Ronin-RS3 PRO,Ronin-RS4,Ronin-RS4 PRO,focus pro
BulletPoint5 : Camera Settings method: Adjust the camera to video mode, then enter the camera menu and find "Microphone Port Settings" or "Microphone/Remote" "Control" option - Select "Remote Control/Line". Then the shutter release can be controlled
BulletPoint6 : RSS-TRS3.5 Applicable camera model; for FUJI-GFX100II,gfx100RF,XT50,X-M5,xs10,x-s20,x-t200,x-e4
CompatibleDevices : Camera
ConnectorGender : Male-to-Female
ConnectorType : USB Type C
IncludedComponents : RSS-3.5mm cable *1pcs
IndoorOutdoorUsage : indoor
ItemName : DYTDIEYINGTU for FUJI-GFX100II/xt50/xs10/x-s20/gfx100RF Cable (TypeC-3.5mm) for DJI Ronin sc/sc2/rs2/rs3/rs4/focus pro Camera Remote Control Cable Shutter Release (RSS-3.5mm Fuji)
ItemPackageDimensions_Height : 0.8 inches
ItemPackageDimensions_Length : 4.7 inches
ItemPackageDimensions_Width : 3.5 inches
ItemTypeKeyword : camera-shutter-release-cords
Manufacturer : DYTDIEYINGTU
ModelNumber : RSS-3.5
NumberOfItems : 1
PartNumber : 1
ProductDescription :

 RSS-3.5mm for FUJI release cable

DJI Stabilizer to FUJI Camera Connection 

1)Support Features: 

Photos,Focus / Metering ,video(You can't control recording until the camera is set to video)

2)Applicable camera model; for FUJI-GFX100II,gfx100RF,XT50,X-M5,xs10,x-s20,x-t200,x-e4,x70

3)When the Fuji camera is set to the video  gear, you can control the video  

4)Applicable to DJI Brand Stabilizer Model:

 Ronin-sc,Ronin-sc2,Ronin-RS2,Ronin-RS3,RS3 MINI,Ronin-RS3 Pro,Ronin-RS4,Ronin-RS4 Pro,Focus Pro

5)Use process: plug type c terminal into DJI's RSS interface, 3.5MM plug into camera  MIC the door ,

 boot can control the photo function. 

6)The 3.5mm plug should be rotated and pressed to the bottom, so that it can communicate normally (because it is tight, it needs some force)

7)Thread length: 35 cm/13.7in, OD3.0mm .Weight: 30 g 

8)Note: must be set in the camera - microphone / remote control project - select "remote control," so that you can control the camera photos with DJI 

9)The GFX100SII camera has a shutter release port on the right side of the camera, above the SD memory card. Not a  MIC port.

ProductSiteLaunchDate : 2024-10-10T13:41:33.451Z
RecommendedUsesForProduct : Camera Control, Shutter Release
Size : RSS-3.5mm fuji
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 45121600