Cart 2 india

Specification
Brand : DYTDIEYINGTU
BulletPoint1 : The camera port is a 2.5mm small round hole, and the Fuji camerajack is mostly on the right, above the SD card
BulletPoint2 : After plugging in the cable, open the DJl stabilizer and you canuse it directly without setting it up
BulletPoint3 : The RSS-F shutter cable, when connected to the DJl stabilizersupports the same function as the shutter button on the camera
BulletPoint4 : Fuji camera video function, you need to adjust the camera to thevideo file can be controlled
BulletPoint5 : How to operate: Lightly press (half press) the red button on theDJl to focus the camera, press the red button all the way (pressthe bottom) to stop for 2 seconds -take a photo/video
Color : Basics-Clear
CompatibleDevices : Canon PowerShot SX730 HS
CompatiblePhoneModels : Canon PowerShot SX730 HS
ExternallyAssignedProductIdentifier : 4054274778314
FinishType : Glänzend
IncludedComponents : 1
ItemHardness : 4H
ItemName : RSS-F Cable DJI Fuji Camera Shutter Release Cable DJI stabilizer Control Cable Support Ronin - sc/rsc2 rs2 / rs3 / Focus pro Handheld Camera stabilizer xt2 xt3 xt4 xt5 gfx100/s gfx50s xt20.
ItemPackageDimensions_Height : 0.39 inches
ItemPackageDimensions_Length : 4.73 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemTypeKeyword : camera-shutter-release-cords
Manufacturer : DYTDIEYINGTU
Material : Polyethylenterephthalat
ModelName : RSS-F
ModelNumber : RSS-F
NumberOfItems : 1
PartNumber : RSS-F
ProductDescription :

RSS-F for FUJI release cable 

DJI Stabilizer to fuji/canon Camera Connection 

1)Support Features: Photos,Focus / Metering 

2)Applicable camera model; for FUJI-GFX100,GFX50SII GFX100S,GFX50S/50R,,X-H2S,X-H2,XT5,XT2,XT3,XT4,XT20XT30,XT30II,XE1,XE2,XE2S,XA3,XE3,XA5,XA7,XH1,X100VX100T,X100F,X-T100

3)When the Fuji camera is set to the video gear, you can control the video 

4)Note: must be set in the fuji camera - microphone / remote control project - select "remote control," so that you can control the camera photos with DJI 5)Applicable to DJI Brand Stabilizer Model: Ronin-sc,Ronin-sc2,Ronin-RS2,Ronin-RS3,RS3 MINI,Ronin-RS3 PRO,Ronin-RS4,Ronin-RS4 Pro,focus pro

6)Use process: plug type c terminal into DJI's RSS interface, 2.5MM plug into camera Hurry to the door , boot can control the photo function. 

7)Do not support DJI RONIN-S 

8)Thread length: 35 cm, OD2.0mm .Weight: 10 g 

9)It also supports Canon cameras to take photos: Model canon-77D,80D,90D,800D,750D,650D,600D,450D,70DR6,R6II,R7,R8,R10,EOS R,EOS RP,M5,M6,M6II,200D,200DII

ProductSiteLaunchDate : 2024-08-09T06:34:30.100Z
ScreenSurfaceDescription : Glatt
Size : RSS-F
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26121600