Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Denash
BulletPoint1 : This section openings optimum glass openings, tiles can be opened, but just open a few holes in the opening, please add water, it will extend the life.
BulletPoint2 : The product is installed on a professional drill or electric drill, bench drill. Rpm 800‑1000 rpm or so, you must add water cooling holes during
BulletPoint3 : and Brand new
BulletPoint4 : This product uses advanced material, with a special enhanced coagulation treatment from electroplating sand suction hole neat, smooth, no broken edges, etc., is the efficient construction, installation hole of choice.
BulletPoint5 : Use: apply to job openings fast glass, plastic sheeting, wood and other products
Color : One Color
ExternallyAssignedProductIdentifier : 7604568363909
ItemName : Glass Hole Saw Drill Bit, Glass Hole Opener Coated Glass Drill Bit for Professional Drill for Plastic Sheets
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : side-and-face-cutters side-&-face-milling-cutters
Manufacturer : Denash
ModelName : Denashum9xs2rgon
ModelNumber : Denashum9xs2rgon
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Denashum9xs2rgon
ProductDescription : 1. This product uses advanced material, with a special enhanced coagulation treatment from electroplating sand suction hole neat, smooth, no broken edges, etc., is the efficient construction, installation hole of choice.
2. The product is installed on a professional drill or electric drill, bench drill. Rpm 800‑1000 rpm or so, you must add water cooling holes during operation.
3. This section openings optimum glass openings, tiles can be opened, but just open a few holes in the opening, please add water, it will extend the life.
4. Use: apply to job openings fast glass, plastic sheeting, wood and other products
5. and Brand new

Spec:
Features:
and Brand new.
This product uses advanced material, with a special enhanced coagulation treatment from electroplating sand suction hole neat, smooth, no broken edges, etc., is the efficient construction, installation hole of choice.
This section openings optimum glass openings, tiles can be opened, but just open a few holes in the opening, please add water, it will extend the life.
The product is installed on a professional drill or electric drill, bench drill. Rpm 800-1000 rpm or so, you must add water cooling holes during operation.
Use: apply to work openings fast glass, plastic sheeting, wood and other products.
Size:
3mm / 5mm / 6mm / 8mm / 10mm / 12mm / 16mm / 18mm / 20mm / 30mm / 40mm / 50mm / 60mm / 70mm
Package Includes:
14pcs Coated Hole Saw Drill Bits
NOTE:
1 After opening installation, commissioning idling should observe whether the beating, then normal operation, the best results
2 Into the hole to have a smooth time, please do not exert pressure on the side and curves spud
3 Have enough openings for cooling and lubrication to reduce wear and coating products off
4 Non occurrence of high temperature drilling dry rub, causing severe wear affect the results
5 The operator
ProductSiteLaunchDate : 2024-09-13T17:33:23.164Z
Size : KM12-160-40-8T
UnitCount : 1
UnspscCode : 27111500