Cart 2 india

Specification
Brand : Fafeicy
BulletPoint1 : Can be used for grinding and milling of aluminum, copper, stainless steel, alloy steel, die steel and other materials.
BulletPoint2 : The milling cutter is made of high‑quality tungsten steel material, which has high hardness and wear resistance, and is not easy to stick to the knife.
BulletPoint3 : The cutting of the milling cutter is ground, the exterior is not rough, and the chip removal efficiency is high.
BulletPoint4 : 3‑tooth milling cutters are mainly used for the milling of stepped and grooved surfaces of difficult‑to‑cut materials.
BulletPoint5 : The milling cutter has a 60° milling angle, which can effectively reduce the roughness.
Color : One Color
CutType : Chamfer Cut
CutType1 : Rounded
CutType2 : Finishing
ExternallyAssignedProductIdentifier : 9585856430412
ItemName : 3‑Tooth Milling Cutter, CNC Cutting Bit Milling Cutter for Industrial Supplies for Industrial Accessory
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : side-milling-cutters
Manufacturer : Fafeicy
Material : Tungsten Carbide
Material1 : Tungsten Steel
Material2 : Tungsten Carbide
ModelNumber : Fafeicyy6ax519weq
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : Fafeicyy6ax519weq
ProductDescription : 1. 3‑tooth milling cutters are mainly used for the milling of stepped and grooved surfaces of difficult‑to‑cut materials.
2. The milling cutter has a 60° milling angle, which can effectively reduce the roughness.
3. The milling cutter is made of high‑quality tungsten steel material, which has high hardness and wear resistance, and is not easy to stick to the knife.
4. The cutting of the milling cutter is ground, the exterior is not rough, and the chip removal efficiency is high.
5. Can be used for grinding and milling of aluminum, copper, stainless steel, alloy steel, die steel and other materials.

Spec:
Item Type: Milling Cutter
Material: Tungsten Steel
Specification: M10x1.5xD8x60
Total Length: Approx. 60mm / 2.4in
Shank Diameter: Approx. 8mm / 0.3in
Pitch: Approx. 1.5mm / 0.1in
Cutter Head Length : Approx. 21mm / 0.8in
Cutter Head Diameter : Approx. 8mm / 0.3in

PackageList:
1 x Milling Cutter

ProductSiteLaunchDate : 2025-03-06T00:00:00.000Z
Size : 6mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 27112803