Cart 2 india

Specification
Brand : Tavkomco
BulletPoint1 : Yield Sign are made of heavy-duty rustproof reflective and laminated aluminum, sturdy enough to withstand severe weather such as strong winds. IP 65 Weatherproof treatment, prevent rainwater from infiltration.
BulletPoint2 : The High Intensity LED blinking lights flash at a rate of 50 – 60 flashes per minute extending the range of visibility during day, night, and harsh weather conditions, Visible distance up to 2500 Ft.
BulletPoint3 : LED Yield Sign for Solar Powered. It can continue working for 5 days even on rainy days (insufficient sun light) when fully charged. Built-in light sensor, automatically turns on when the light is low.
BulletPoint4 : Pre-installed U-shaped hoop mount,Applicable column diameter: 76/89mm. Easy to mount to square or round galvanized posts, wooden posts and chain link fences, etc. Suitable schools across, governments,highway curbs, parking lots, apartment buildings, etc.
BulletPoint5 : Please note that the product only includes the Yield Sign + solar panel + U-shaped hoop mount. You need to prepare the vertical column of the right size by yourself. Please understand.
Color : A
ExternallyAssignedProductIdentifier : 1351330971645
ItemName : 28'' LED Yield Sign, Solar Powered+ Engineering Grade Reflective Film, Street Traffic Warning Yield Sign, Heavy Duty Rust-Proof Metal Frame (A,28 in(71cm))
ItemTypeKeyword : sidewalk-signs
Manufacturer : Tavkomco
PartNumber : Tavkomco
ProductDescription :

Features:

1,9 high power white LEDs.

2,Engineer grade reflective Film.

3,Full Charge Run Time: 96-120 hours.

4,Solar Panel Output: 12 volts, 5 watts.

5,Charging Time: 6-8 hours.

Product Details:

Size: 28''x28''x1.4''/ 71cm*71cm*3.5cm.

Duration on Rainy Days (Fully Charged): 5 days.

LED Luminance: >6000mcd.

LED Light Working Life: 10,000H.

LED Flicker Frequency: 40-60/min (Customizable).

Visual Distance: 0.5 mile.

Mounting: U-shape Hoop mount. Applicable column diameter: 76/89mm(Customizable).

Working Temperature: -40℉ - 140℉.

Working Humidity: 5% - 93%.

Tips:

1. Please install this sign where there is no shade from the direct sunlight.

2. Please check whether the LED lamp can work normally before installation. First turn on the switch, then cover the solar panel to simulate the night state and see whether the LED lamp can work normally.

3. The direction of the solar panel needs to be calibrated during installation. The best angle in the direction that can receive the longest direct sunlight in a day.

4. Please clean the dust on the solar panel every 3 months to ensure that the solar panel can generate electricity normally.

5. Please turn off the switch to prevent the battery from draining out if not in use for a long time,. It needs to be charged in full sunshine for 3 days before normal use if not used for a long time.

6. Please do not disassemble this product without our permission.

7. If there are no special circumstances, please turn on the light switch to ensure the battery has enough power in the case of insufficient light and extend the battery service life.

Size : 28 IN(71cm)
UnspscCode : 55121700